the ecm in the baleno has a self learning curve like all OBD-1 series. that is you can "flash" its memory by disconnecting the battery AND holding the two terminals of the car together (not the battery!!!) this discharges the current completely and on reconnecting the ecm is in "learn" mode...you are suppose to drive the car hard for about 20 min and then switch off and switch on. now the settings are stored. these are the basic settings of air flow,throttle,exhaust etc.
so what wild card wanted to know was should he do this since he had replaced his filter. I said go ahead since there is no harm in doing it.
__________________
CEN is in the house!!!!!! |