Quote:
Originally Posted by dash  The setup is in the DVD player. Go to the setup menu on the DVD remote and in the sound setup section, enable the digital output. I think it would be setup for Analog by default and I was able to get the sound through HDMI after doing this setup. |
Yup! I figured that out - forgot to post!
The manual asks us to enable the HDMI output. But I found that one has to enable the 'Digital out' first - but that is accessible ONLY with the HDMI output turned OFF
(telling you - the people who think these up...!!). So for the any other person stuck with this with this brand of DVD's here's what you need to do.
1. Go to Setup> Digital Audio Setup - Here you will find three options Digital Output, LPCM Output, and HDMI Audio Setup.
2. Go to HDMI Audio Setup and ensure it is set to off (
Hint: the other two options mentioned above will be greyed out if HDMI is set on on - If its not greyed out proceed directly to Step 3)
3. Select Digital Output and out of the options given set it to "ALL"
4. Now go back to HDMI Audio Setup and set it to "ON".
5. Exit Setup.
Sit back and enjoy sound in all its digital glory!!
