Then the headliner was fitted along with new tapes to position the rear bows correctly. Unfortunately there was quite a bit of variation on the specs so it took me quite a while to get it correct.
Next the rear window frame was reconditioned, painted, and a new synthetic tack strip mounted.
Then the rear window frame along with rear pads were mounted. Again, the pads were incorrect so I had to make my own pads.
The next layer in the top pad. It consists of a wrap which as to be first installed then the foam and then the wrap folds over the foam.
Just installed the this top pad wrap. The foam is the wrong size (short by 4 inches) %&!## so I'll need to go buy some new foam. |