Quote:
Originally Posted by Shakensoul  Thanks man, you're my lifesaver again. 
Now you're speaking greek to me  |
Let me talk in english now
The above pic is of the crank for this you have to remove the head and bore (barell) and check the play side wards as shown in the pic it should be tight and stiff, if its little shaky say by 1mm or more you have replace the crank there's other way you can reset it by giving it to any lathe shop but i would never advice against it rather get a new one. don't buy the crank from karolbagh get it from any yamaha dealer.