Quote:
|
Originally Posted by nitrous Hi ICEmen,
My plan:
HU: Pio 6750
Front spk: Stock(from ford)
Rear spk : Pio 6990 (on MDF parcel tray)
Sub 1: Pio 305F (on MDF parcel tray)-powered by Sony xplod 502 amp
Sub 2: Pio 305C (in MDF Enclosure)- powered by pio 6000F amp
The 6990s are also powered by the 6000F amp
Sub 1, Sub2 and 6990s are all powered by a single 6000F amp. :( |
you can connect 2 amps all you need is a Y connector. However make sure this connector is laid out where there are no power cables as you can introduce alternaor noise very easily.
HU Front------> front speakers
Rear ------> 6000F --------> 6990
Sub -------> Y connector ------> 6000F --------> 305C
_______________________------> 502F --------> 305F
OR
HU Front------> front speakers
Rear ------> Y connector ------> 6000F --------> 6990 and 305C
_______________________------> 502F --------> 305F
In the second option the 6000F must have LPF engaged for channels used for the 305C.
If the 6000F has a fullrange out that can be used to feed the 502 and then you dont need the connector.