i bought white leds six of them each costing 40rs, wired three in series with a 330ohms 2 watt resistor and soldered all in a pcb. it is small enough to fit inside baleno stock fitting inside. i used the small connections fron household switches to make contact ends so that it can be inserted into the lamp holder firmly. you can also just wire it directly. i inserted them for convience. can anytime pull it out, the leds are rated at 4.5v each so will work fine with engine running also.
the one i put in dicky was a rady made strip costing 400rs. just stuck it with double sticking tape insside. will post the photos soon.
for use of fog lights i am looking at more powerful leds, each costing 400 rs and more. i think a minium of 4 will be required. |