Quote:
|
Originally Posted by z klasse A Baleno cam has an extended socket for the cam sensor which does not fit into the esteem as it has a distributor setup compared to the DIS unit of the baleno. For the baleno cam to fit into the esteem, you need to machine off the extended part off the cam and then only it will fit. Note: only a qualified person will be able to do it. Also the baleno and esteem cam specs are the same. They differ by probably 2 degree. |
While most of what u said is true .. Using the baleno's cam (which is distributorless ignition type) to fit on the esteem is quite a hassle worth avoiding .. However im not quite sure if the difference between the esteem and the baleno cams is just 2 degrees apart .. Its much more than that or so im told .. However the swifts and the esteems are just about 3 degrees apart .. Also since the baleno runs a lower profile cam than the esteem or the swifts beats me to it asto why would anyone want to replace it with it ..
Is mihir back to driving ?? I heard he has sustained a few injuries sometime back ..