Team-BHP - View Single Post

rsjaurr · 11th October 2006, 16:56

I just want to share something which i noticed but i never discussed it here while installing dynamat extreme in my car's door panels.

While my installer was installing door speakers,i was busy with dynamat and putting it on doors.I asked JB[on phone] that should i put dynamat over the panel and also cover the all the wires which r there on door panels.He told me that i need the damp the door and not wires.these r exactly same words which i still remember.
LBM,if i am not wrong u seem to have done which JB advised me not to do.

Other more important thing which i want experts to comment upon is about removing that platic sheet [used for water proffing the door panels]which we remove from door panels to install speakers or damping stuff.[In LBM's pictures no.3,4 and 5 we can see black adhsive material which was left there after removing that plastic sheet]
I did same thing for two doors but i while doing 3rd and 4rth door i removed the sheets 1st without removing that black adhesive material and put dynamat there and re-put the plastic sheet back on its original place.That way atleast my car's 2 doors were more protected from water entering in door panels and damaging speaker.

Below 1st pic is when i damaged the plastic sheet and installed dynamat and 2nd pic is when i put the sheet back after installing dynamat.I hope u can see dynamat through that plastic sheet though i am sorry for poor quality pics.[taken with my old Moto E365 cam phone]

11th October 2006, 16:56	#222 (permalink)
rsjaurr BHPian Join Date: Sep 2005 Location: Batala Posts: 685	I just want to share something which i noticed but i never discussed it here while installing dynamat extreme in my car's door panels. While my installer was installing door speakers,i was busy with dynamat and putting it on doors.I asked JB[on phone] that should i put dynamat over the panel and also cover the all the wires which r there on door panels.He told me that i need the damp the door and not wires.these r exactly same words which i still remember. LBM,if i am not wrong u seem to have done which JB advised me not to do. Other more important thing which i want experts to comment upon is about removing that platic sheet [used for water proffing the door panels]which we remove from door panels to install speakers or damping stuff.[In LBM's pictures no.3,4 and 5 we can see black adhsive material which was left there after removing that plastic sheet] I did same thing for two doors but i while doing 3rd and 4rth door i removed the sheets 1st without removing that black adhesive material and put dynamat there and re-put the plastic sheet back on its original place.That way atleast my car's 2 doors were more protected from water entering in door panels and damaging speaker. Below 1st pic is when i damaged the plastic sheet and installed dynamat and 2nd pic is when i put the sheet back after installing dynamat.I hope u can see dynamat through that plastic sheet though i am sorry for poor quality pics.[taken with my old Moto E365 cam phone]