Also the Scorpios front door install is tricky. There is absolutely no space to fit in 6" components.
In my bosses case the door pad was cut and a very thick mdf spacer ring was installed on the door body. The compos were then mounted on this.
The ideal location for the compos is where the door pocket is for the scorpio. So you also have to cut the door pocket else if you install the speaker inside the door pocket you will be blocking it.
The tweeters were mounted on top of the same door pad by cutting a hole again and angling the tweeters to the listener.
The rear ovals (GTO937) were mounted on boxes between the side facing rear and the middle row so as to not reduce sitting area and not block sound too.
__________________
\ / ][ |) `/ [_] "!" |