Team-BHP - View Single Post - My Experience With adding Boric Acid in Engine oil

finetuning · 8th February 2007, 17:48

kaizer,

After adding boric powder into engine it starts removing carbons & its therefor advisable to replace oil filter after say 300 km onwards.....its not neccessary but advisable........full effect will be seen after we change oil with new fresh one with again new filter......by the time we complete say 1000 km this treatment is applied & starts giving best possible benefits....

I see this as a breakthrough in friction reduction.....recently to my Gujarat trip I used this treatment in at least 15 bike....pulsars...hero hondas...honda activas.....& scooty peps to name a few.....result is astonishing......

After adding this into bike instantly we feel rise in idle rpm & within few km running can feel smoothness & calmness of engine......also kick pedal becomes very smooth......this was more evident in pulsars.....I also observed that with new bikes this effect is more & with old bikes this takes time to clean carbon deposites but effective......in one of the Honda activa I observed such a great power & smoothness......its as if there is no engine sound at all......also observed less engine temp......

Hi vichu_zen,

Make sure not to change engine oil for at least 800 to 1000 km.....this is a must.....also do not change any carburetor setting.....you must be feeling extremly smooth bike I can imagine.....do check FE & engine temp. too.....
In bikes I think 10 gm powder is sufficient......I always prefer 10 gm powder in bikes......there is some consideration using such amount......

Enjoy...

8th February 2007, 17:48	#58 (permalink)
finetuning BHPian Join Date: Mar 2006 Location: Mumbai Posts: 391	kaizer, After adding boric powder into engine it starts removing carbons & its therefor advisable to replace oil filter after say 300 km onwards.....its not neccessary but advisable........full effect will be seen after we change oil with new fresh one with again new filter......by the time we complete say 1000 km this treatment is applied & starts giving best possible benefits.... I see this as a breakthrough in friction reduction.....recently to my Gujarat trip I used this treatment in at least 15 bike....pulsars...hero hondas...honda activas.....& scooty peps to name a few.....result is astonishing...... After adding this into bike instantly we feel rise in idle rpm & within few km running can feel smoothness & calmness of engine......also kick pedal becomes very smooth......this was more evident in pulsars.....I also observed that with new bikes this effect is more & with old bikes this takes time to clean carbon deposites but effective......in one of the Honda activa I observed such a great power & smoothness......its as if there is no engine sound at all......also observed less engine temp...... Hi vichu_zen, Make sure not to change engine oil for at least 800 to 1000 km.....this is a must.....also do not change any carburetor setting.....you must be feeling extremly smooth bike I can imagine.....do check FE & engine temp. too..... In bikes I think 10 gm powder is sufficient......I always prefer 10 gm powder in bikes......there is some consideration using such amount...... Enjoy... Last edited by finetuning : 8th February 2007 at 17:50.