View Single Post
Old 22nd May 2007, 02:11   #75 (permalink)
low_bass_makker
Senior - BHPian
 
low_bass_makker's Avatar
 
Join Date: Mar 2006
Location: Faridabad
Posts: 6,062
Infractions: 0/1 (5)
Default

Quote:
Originally Posted by clipto333 View Post
Navinji, didnt get what you saying(loose me as in?)

ok here are the t/s parameters taken from bass box pro's database. i hope they are accurate.

Fs - 33.4 Hz
Qms - 17.75
Vas - 105.6 Liters
Cms - 0.286 mm/N
Mms - 79.49 g
Xmax - 6 mm
Sd - 511 sq.cm
Qes - 0.494
Re - 3 ohms
Le - 0.618 mH
Z - 4 ohms
BL - 10.23 Tm
Pe - 150 watts
Qts - 0.481

Clip the 302F is quite old sub approx 8-10 years old.....I think it will not handle 250 watts....I think I will not take 150 even.....but if the owner is on tight budget...he can put then in a ported of volume 1.5 to 2 cuft....and tune the port with 3 inch pipe....with different lenghts of 8-14 inch.....put that one which sound you best......

(the above sizes and dimension are just average values.....based on my experience....I dont confirm what will be the results......but one thing is sure it will produce good SPL....)
low_bass_makker is online now   Reply With Quote