Team-BHP - View Single Post

jkdas · 23rd May 2007, 11:38

some specs
Maximum Output Power 4 x 65 W (4 ohm) + 1 x 225 W (4 ohm)
or 4 x 56 W (4 ohm) + 1 x 350 W (2 ohm)
Frequency response (+ 0 dB, -1 dB): 10 Hz - 40 000 Hz /
(0.5 dB, -3 dB): 5 Hz - 240 Hz Hz
Distortion (10 Watt/1 kHz): 0.01% /
(10 Watt/120 Hz): 0.03 %
S/N ratio 95 dB
High Voltage Input Capability 125 mV - 6.5 V
Max. current consumption (A/4ohms) 43.8
Chassis size (W x H x D) 268 x 52 x 350 mm

INR: 26k

Srx would be a better bet

23rd May 2007, 11:38	#10 (permalink)
jkdas Senior - BHPian Join Date: Sep 2005 Location: Thiruvananthapuram Posts: 5,691	some specs Maximum Output Power 4 x 65 W (4 ohm) + 1 x 225 W (4 ohm) or 4 x 56 W (4 ohm) + 1 x 350 W (2 ohm) Frequency response (+ 0 dB, -1 dB): 10 Hz - 40 000 Hz / (0.5 dB, -3 dB): 5 Hz - 240 Hz Hz Distortion (10 Watt/1 kHz): 0.01% / (10 Watt/120 Hz): 0.03 % S/N ratio 95 dB High Voltage Input Capability 125 mV - 6.5 V Max. current consumption (A/4ohms) 43.8 Chassis size (W x H x D) 268 x 52 x 350 mm INR: 26k Srx would be a better bet __________________ The original point and click interface was a Smith & Wesson Last edited by jkdas : 23rd May 2007 at 11:39.