Team-BHP - View Single Post - My Experience With adding Boric Acid in Engine oil

finetuning · 3rd June 2007, 17:13

Hi TURBOSAM,

Since you completed 5000 Km with this treatment its advisable to replace only oil filter as most of debris will, be collected here.Also if you find oil too much black then can replace it with new oil filter.Removal of old carbon layers from cylinders restores original compression.This can be felt with improvement in running charecteristic of car.

As this is one time metal treatment there is no need to repeat this.Until engine is opened boron particles will stick to inside parts of engine.

My Esteem has completed 17000Km with this treatments.

Recently I travelled 2000Km with family towards Gujarat in just Rs 3000 as the cost of Fuel(LPG) resulting into Rs 1.5 per Km with 4 persons and with 80% a/c.

Enjoy....

3rd June 2007, 17:13	#137 (permalink)
finetuning BHPian Join Date: Mar 2006 Location: Mumbai Posts: 391	Hi TURBOSAM, Since you completed 5000 Km with this treatment its advisable to replace only oil filter as most of debris will, be collected here.Also if you find oil too much black then can replace it with new oil filter.Removal of old carbon layers from cylinders restores original compression.This can be felt with improvement in running charecteristic of car. As this is one time metal treatment there is no need to repeat this.Until engine is opened boron particles will stick to inside parts of engine. My Esteem has completed 17000Km with this treatments. Recently I travelled 2000Km with family towards Gujarat in just Rs 3000 as the cost of Fuel(LPG) resulting into Rs 1.5 per Km with 4 persons and with 80% a/c. Enjoy.... Last edited by finetuning : 3rd June 2007 at 17:18.