Team-BHP - View Single Post

Absar · 11th June 2007, 13:40

Hello! An update.. I had a checkup on the module/wiring today. Its all intact, (I did this checkup because its held by temporary rubber clips). I did look into that hole which one of you circled, behind that is another tiny hole, kinda complicated to insert the wire in that. So still using temporary wire setup. Checked near the clutch also, no possible holes to let the wire in.

The tape which I've temporarily put on that day of install to block dust and water from entering the HL, is still intact, I will find out about the rear cover of the HL and see if its available separately and for a good price and then go ahead with the drilling perhaps. My current setup is also not bad.

I'm trying to hook my strobes to the car's security system. Its pretty simple as per the instructions. To hook up the blue wire from the module to the red wire from the security system's module. This way, on pressing the locate button, the strobes get activated to help find your car easier as well as when the alarm is triggered, the strobes flash to create an attention to everyone. I did find the wire, i'll check if it works later today.

At the moment, I'm having fun with the strobes. Two times I drove through the city roads with strobes on, and I got a clear path of me ahead lol (being careful from cops though).

Btw, one issue got solved- the issue where i had fixed the wrong connectors. I was able to remove it and fix it correctly.

A

11th June 2007, 13:40	#199 (permalink)
Absar BHPian Join Date: Feb 2007 Location: Madras Posts: 552	Hello! An update.. I had a checkup on the module/wiring today. Its all intact, (I did this checkup because its held by temporary rubber clips). I did look into that hole which one of you circled, behind that is another tiny hole, kinda complicated to insert the wire in that. So still using temporary wire setup. Checked near the clutch also, no possible holes to let the wire in. The tape which I've temporarily put on that day of install to block dust and water from entering the HL, is still intact, I will find out about the rear cover of the HL and see if its available separately and for a good price and then go ahead with the drilling perhaps. My current setup is also not bad. I'm trying to hook my strobes to the car's security system. Its pretty simple as per the instructions. To hook up the blue wire from the module to the red wire from the security system's module. This way, on pressing the locate button, the strobes get activated to help find your car easier as well as when the alarm is triggered, the strobes flash to create an attention to everyone. I did find the wire, i'll check if it works later today. At the moment, I'm having fun with the strobes. Two times I drove through the city roads with strobes on, and I got a clear path of me ahead lol (being careful from cops though). Btw, one issue got solved- the issue where i had fixed the wrong connectors. I was able to remove it and fix it correctly. A __________________ Ford Ikon 1.6 Nxt ZXi, 2005 I cried because I had no VTEC, until I met a person who had no 1.6 ROCAM. Last edited by Absar : 11th June 2007 at 13:42.