Quote:
Originally Posted by navin  the midbass is mounted on a spacer. |
This would be fine, if the midbass was mounted on the spacer and then the spacer was screwed onto the door panel, but navin, LBM says that his allen bolts and nuts are mounted through the door metal.
Quote:
Originally Posted by low_bass_makker 
After that the allen bolts are used which is passed through the midbass then the wooden ring and finally the door metal frame. when these 4 bolts are tighten they firmly hold the midbass in place and any vibration can allow the speaker to vibrate.. |
I think LBM, (silly boy mastikhor, posting pictures of spanners) what is being asked here is, how did you get hold of the nut behind the speaker, if it goes through the metal.
By your explanation, it seems that the spacer is mounted first, on the door and then the speaker is bolted on. How would you access the nut on the rear, of the (for example) lowermost corner allen bolt?