Team-BHP - View Single Post - So.... why do we need those thick wires??

Gill · 22nd November 2007, 18:27

LBM, went through few threads about these calculations,but couldn't make out the best way of doing it.even i didn't get, how you have calculated the watts,mono is a class d amp.
Is there any benchmark for efficiency(I presume heat generated) for amps of different class.
Or why one should consider heat generated(Thermal fig) into account while calucalating the wires
it will be lot easier for me if you suggest the wires n fuse i should opt for.
Better solve the problem rather making it more complicated.
I said so as there already had been a heated debate on this issue.let's have a swift solution.
NO offence meant to any one!

Cheers!

22nd November 2007, 18:27	#84 (permalink)
Gill BHPian Join Date: Aug 2007 Location: Chandigarh Posts: 278	LBM, went through few threads about these calculations,but couldn't make out the best way of doing it.even i didn't get, how you have calculated the watts,mono is a class d amp. Is there any benchmark for efficiency(I presume heat generated) for amps of different class. Or why one should consider heat generated(Thermal fig) into account while calucalating the wires it will be lot easier for me if you suggest the wires n fuse i should opt for. Better solve the problem rather making it more complicated. I said so as there already had been a heated debate on this issue.let's have a swift solution. NO offence meant to any one! Cheers! __________________ Experience is the worst teacher; it gives the test before presenting the lesson. Last edited by Gill : 22nd November 2007 at 18:32.