Team-BHP - View Single Post - Making of a budget car entertainment, navigation, diagnostics setup

gigy · 12th January 2008, 11:52

i am using a 1.7ghz celeron and 1gb 400 DDR1 ram on a zebronics board.(1gb ram was removed from my existing home pc since it is on its way to the dustbin soon).
you get celeron 3ghz with motherboard for 3.6k brand new(realized that only after i picked up this zebronics board+cpu). that biostar package also comes in 4.5k approx.
the DC_DC power supply has a turn on delay control for amplifier also. my amplifier is already wired to the cpu to the speaker out through a volume control on console.
will make the temperature controlled fan also after sometime.if you can give me any known reference will be great help.
OFFTOPIC:
(that kind of thing is another project due on car to control ac. i have planned to change the ac control to electrical or electronic depending on the circuit i get so that compressor operation can be control based on cabin temperature using relay rather than a fixed mix of hot air to the cooled air. this will save on fuel and keep temperature as per my requirement)

12th January 2008, 11:52	#58 (permalink)
gigy BHPian Join Date: Jul 2006 Location: mumbai Posts: 443	i am using a 1.7ghz celeron and 1gb 400 DDR1 ram on a zebronics board.(1gb ram was removed from my existing home pc since it is on its way to the dustbin soon). you get celeron 3ghz with motherboard for 3.6k brand new(realized that only after i picked up this zebronics board+cpu). that biostar package also comes in 4.5k approx. the DC_DC power supply has a turn on delay control for amplifier also. my amplifier is already wired to the cpu to the speaker out through a volume control on console. will make the temperature controlled fan also after sometime.if you can give me any known reference will be great help. OFFTOPIC: (that kind of thing is another project due on car to control ac. i have planned to change the ac control to electrical or electronic depending on the circuit i get so that compressor operation can be control based on cabin temperature using relay rather than a fixed mix of hot air to the cooled air. this will save on fuel and keep temperature as per my requirement) __________________ Baleno1.6,Carputer:AMD Athlon 3000+,2gbram,80gb HD,centerfuse FE,satguide gps. Last edited by gigy : 12th January 2008 at 11:54.