View Single Post
Old 21st January 2008, 17:09   #16 (permalink)
DerAlte
Team-BHP Support
 
DerAlte's Avatar
 
Join Date: Mar 2007
Location: Bangalore
Posts: 1,928
Default

Quote:
Originally Posted by shuvc View Post
... There's one issue though:
The rear ELs are very faint. Barely audible at a volume level of say 30 (the Pio 4950 goes up to 60 odd). ...
Congratulations, @shuvc, that's terrific!

Your problems sounds like a tuning problem - the clue is your description: "Amp gain for both sub and fronts are at around 2-3V"! It is TOO precise to be true - are you relating to the HU spec (i.e. 4V pre-out)?

Your front setting (ignore sub) is too loud for the rear, so relatively the rears are sounding feeble.

Tune it once again, this time making sure that at any HU volume setting, Rear (fed from HU) is just less than Front (fed from amp) in the front seat. The amp gain knob is usually 270degress, so next time observe/quote the approx position of the indicator w.r.t. the left extreme.
__________________
Never believe it cannot be done - it's only that you haven't found out how!!!
DerAlte is offline   Reply With Quote