Quote:
Originally Posted by Autophile  Its not true that 9887 is nothing without imprint kit.
You don't really need the imprint kit to make 9887 perform to its maximum. The imprint kit is for noobs  |
I did not knew that the imprint is for noobs.
Quote:
Originally Posted by Autophile You were able to spot a peak and dip at 7KHz in two HU's by listening to them. I must say you have very good ears . |
Me not alone Zuchero singh is also agreeing with me here. And thank for the complement.
I hope you are not using Microphone based measurement in RTA to compare the frequency response of the two units.
[/quote]
For what sir. also I dont have a mic based RTA with me.
Quote:
|
Originally Posted by Autophile
Also peak or dip at a certain frequency band will not affect the staging to that extent. In case of 7KHz its way out of crucial midrange area.
|
So what it would be. I would like to know your experience. What caused it in your case.
Quote:
|
Originally Posted by Autophile
The problem could be with your 7KHz tweeter / midrange crossover point and slope settings.
|
I dont think so because the Midrange and tweeter are working with there passive networks and not Active.
I addition to this If you are interested in knowing today again I and zuchero singh did one test. I boosted the 8 khz eq in the HU and the soundstage was higher when compared to flat setting. What caused it maybe you can tell us.