Quote:
Originally Posted by DerAlte  Superb, @diezel! Congratulations.
1. What was the length of the cable(s) from the PC cabinet to the LCD?
2. What is the 'black box' at the extreme right of the boot?
3. Did you connect the audio direct to the amp (looks like a Sony 4-ch) or did you wire it to the HU? (Which HU?)
4. Where did you put the DC-DC Convertor? (not visible in the PC cabinet)
5. Where did you draw power from? |
Thanks guys, last couple of days I have been going through some stability tests and finally managed to get the system completely stable.
1. I bought a Extended M-F VGA cable of 2m length.
2. The black box on the extreme right is just the cabinet's top cover. Behind that is my JBL MonoBloc.
3. The audio is directly connected to the AUX of my pioneer 7950 HU. Under the cabinet is the place where my Focal SW are installed.
4. The DC-DC card is installed within the cabinet itself and as you see 3 wires are coming out of the cabinet, one connects directly to the main power line drawn from the battery and the other two are the ground and the remote cable(Connected to Remote cable coming from HU)