Quote:
Originally Posted by sonic_boom 
2) What does that darn Freq(32Hz to 320 Hz) dial do ??
There are two dials , one for front and one for rear channel and I am completely clueless about them both ??
Fellow 75.4 users , please enlighten...
|
That dial only comes into play if you use the LPF (low pass filter) or HPF (High pass filter)
In the case of the subwoofer, if you want the subwoofer to play at 100Hz and below, then you put the LPF on and set the dial to 100. I hope you understand.
Similarly if you want to cut your speakers from going below 100Hz, you put HPF on on that channel and set the dial to about 100Hz.