View Single Post
Old 25th April 2008, 12:53   #54 (permalink)
DerAlte
Team-BHP Moderator
 
DerAlte's Avatar
 
Join Date: Mar 2007
Location: Bangalore
Posts: 1,625
Default

Quote:
Originally Posted by Bass&Trouble View Post
That would be an excellent hack for the older players.
But are you sure the AM signal would have a seperate track to the "mixer"? Could it be possible that all the bands of tuner use the same channel and only the source is switched?
The AM and FM sections are separate chips usually, which give a 400mV p-p signal, which is switched at the mixer. At least that was the scheme that was used earlier; there could be a single chip solution now. If one searches in the ICE section, there are a couple of instances where this has been done by TBHP members.
Quote:
Originally Posted by theodore_ftw View Post
This should be a regular 3.5mm Male to 3.5mm Male which shouldnt cost anymore than Rs100 and is available at any local audio video / electronics store. But do check if your AUX IN takes a 3.5mm else you would need a convertor from a 2.5mm to a 3.5mm which is another Rs100.
In the Blau HU in question, there is no EP jack in the HU. The AUX-In terminates in pins in the rear connector (not RCA). The Blau cable connects to the HU rear connector AUX-IN pins on one side and a 3.5mm EP jack on the other side.
__________________
Never believe it cannot be done - it's only that you haven't found out how!!!
DerAlte is online now   Reply With Quote