Here are changes -
1. Engine mounts
2. Both front drive assemblies.
3. Engine Oil (Mobil1 SuperSyn)
4. Oil Filter
5. Some plastic clips under front fender.
Drive experience after change -
1. Engine vibration from standstill to motion: It improved drastically, i can see releasing clutch slowly on plan surface without acceleration doesn't produce any vibration. On uphill it is reduced by 90% (still I can feel little bit of vibration, 10% compared prior to change)<- I think this is common.
2. Uphill stop and go: This is also not having any major vibration and same as above 1.
3.Power: Certainly now if I did not press accelerator then engine is not dieing for power. It balances car with idle rpm on our buildings parking ramp without knocking. I need to floor accelerator to move ahead. On more slop I need to give little acceleration but car moves responsively.
Responsiveness of car increased.
4. Effect of Mobil1: I have to find out because initial observation about temperature, it is stable at 1/2 position. Noise and power I could not make difference in my 25 KM driving.
THIS WAS THE ACTUAL CAR SX4 -I WAS EXPECTING.
About changes - This was for certain cars, Dealer have circular mentioning chassis number. During service they are changing it.
now part lists is here -
