Quote:
Originally Posted by abhinav.gupta88  But i heard that the front are already components and function quite well.
and shouldnt the rear coaxs be connected to the amp. |
the front speakers and rear speakers are components. the rear speaker has a woofer behind the rear seat and the tweeter in the rear door.
if you see my earlier post i suggested 2 4 ch amps. this will give you 8 channels of power.
I have linked just one of these below, the specs of the others (JBL, Pioneer, Blaupunkt) are comparable
Kenwood - KAC-8404
as you can see you will get about 4 x 50W rms. When 2 chanels of any of these amps are bridged it will give about 150Wrms. So if you bridge 4 channels (out of the 8 channels) you will get 2 x 150W and 4 x 50W. Use the 2 150W channels fo the 2 10" subs (150W is a bit shy for a 12" sub) and use the 4 50W channels for the front and rear speakers.
BTW just to inform you there is a cheaper Sony amp also available in India. While it has adequate power, many at TBHP find it a bit grainy so beware of this. Also many at TBHP have had problems with BOSS and other such "unbranded" RCA wire. It is safer to stick to better brands like Audison and Monster. In some cities Ground Zero RCA cables are also sold, I am not aware about where but Bass&Trouble (TBHP member) will know more about this.