Thank you to all who took time out to reply to my query. The other electronics seem to be working fine and even the low beam is working fine. It's just the high beam which blows off and the pattern is quite erratic. It starts off from the right one and after the right one is replaced, the left one blows out. Seems like the car is conspiring against me not to have 2 full high beams
aah78 - you mentioned about a mess up while wiring up the relay. How do we check if there's a problem with the relay. Some diagnostic perhaps. Maybe the relay itself is ok but the wiring not quite ok? Putting up halonix and hoping they don't blow out would only solve the problem but not help me understand why the problem is there. Also, how do i find out if the tubes are original? some marking to look out for perhaps. Please pardon me for my limited knowledge but this time i'm determined to get to the bottom of this and not be taken for a ride by the pesty mechanics
tsk1979 - you mentioned my stock tubes could be fake? tubes put in by the honda personnel at the service station. How can they be fake? to add they are philips tubes.
Thank you all for the advice. Appreciate it.
