[quote=omishra;812225]Here are changes -
1. Engine mounts
2. Both front drive assemblies.
3. Engine Oil (Mobil1 SuperSyn)
4. Oil Filter
5. Some plastic clips under front fender.
Drive experience after change -
1. Engine vibration from standstill to motion: It improved drastically, i can see releasing clutch slowly on plan surface without acceleration doesn't produce any vibration. On uphill it is reduced by 90% (still I can feel little bit of vibration, 10% compared prior to change)<- I think this is common.
2. Uphill stop and go: This is also not having any major vibration and same as above 1.
3.Power: Certainly now if I did not press accelerator then engine is not dieing for power. It balances car with idle rpm on our buildings parking ramp without knocking. I need to floor accelerator to move ahead. On more slop I need to give little acceleration but car moves responsively.
Responsiveness of car increased.
4. Effect of Mobil1: I have to find out because initial observation about temperature, it is stable at 1/2 position. Noise and power I could not make difference in my 25 KM driving.
THIS WAS THE ACTUAL CAR SX4 -I WAS EXPECTING.
About changes - This was for certain cars, Dealer have circular mentioning chassis number. During service they are changing it.
now part lists is here -
Hello Omishra I discussed this issue with Motorcraft noida yesterday
what they said ther are not aware of such thisng and has not received any circular in this regard.
Can you pls get the details of chasis number range and circular number maruti has send.It will benefit many people.
Can you also letus l your MASS name.
Thanks |