Quote:
Originally Posted by blueraven316  for a JBL gt5 component speaker, no wooden spacer ring was used to install this speaker, even if it would have been some ply wood it would not have been this bad. The spacer ring here is actually a Sony speaker grill 
Two screws were put through each speaker instead of 4 and to add icing to the cake they did not even hook up the crossover with the component, ths mid woofer and tweeter was connected to the head unit directly. |
I wont be surprised if the -ve of cross over was connected to ground as well.
On a lighter note, the installer might have wanted the front stage to be 'active'
