Upgradation to Component speaker setup! - Team-BHP

dsinz · 19th December 2006, 10:01

Team

I have a Panasonic HU, Panasonic Oval rear speakers and front Sony speakers.

Now I want to upgrade to Front Component speaker set up. Can I use the same sony speakers for the set up or should I use the one that comes with the component speaker set up.

Also let me know what could be an ideal brand/specs for the component speaker set for ALTO.

Thanks!

K

vid6639 · 19th December 2006, 10:13

dsinz the alto takes 4" speakers on the dash which you mus be aware of. Components are not available in that size.
The only option you have is to put 5.25" or 6" components on the door with some modifications.
Have a look at speedzak's garage.

Since your setup is pretty basic go for JBL cs2165c 6" compos or for GTO507 5.25" compos.

speedzak · 19th December 2006, 10:17

You will have to remove the Sony speakers to fit in a component system. And please do it.

Theoritically, it is possible to use your current speaker as a woofer for the compos by connecting it to the crossover. But It'll kill all the benefits of buying a component. And you can't get crossover networks cheaper and They're not easily available. They come as a full system containing woofer, tweeter & crossover(s).

May I ask why you want to do this? Are you so much in love with that piece of Sony?

dsinz · 19th December 2006, 12:32

Well, I am not in love with Sony!

. I was thinking, If I could reuse it without having to waste that speaker. Not sure if they will take back.

So was bit considerate towards sony... Else I am not for sony. Did not have much knowledge of ICE when buying the car.

Now thinking for some better options!

navin · 19th December 2006, 12:56

Before you install components in your Alto please discuss in detail (with your installer) where the tweeters will go (flush mounted or surface mpounted). I have seen many people who choose component speakers and do not realise that their car cannot accomodate tweeters (no tweeter pods). Besides most installers do not care and do a hatchet job.

speedzak · 19th December 2006, 13:02

Dsinz! Have a look here; http://www.team-bhp.com/forum/car-en...highlight=alto

That will help you out I think.
Dont flush mount the tweeters in Alto. My opinion. That's all.

abhibh · 19th December 2006, 13:56

Holy Cow!!!! 1Lac on Ice wow.. nice system speedzak..

Btw. if components cannot be fitted in front and one is unable to get the MDF done as speedzak what are the options left ?

Quote:

Originally Posted by speedzak

Dsinz! Have a look here; http://www.team-bhp.com/forum/car-en...highlight=alto

That will help you out I think.
Dont flush mount the tweeters in Alto. My opinion. That's all.

dsinz · 19th December 2006, 14:11

Oh boy! That is one hell of a ICE Setup! Amazing to see so detailing of each and every aspect.

One take away for me is the placement of speakers. So let me check with some ICE dealer for the upgradation and will let you guys know.

thanks mate!

navin · 19th December 2006, 14:16

flush mounted tweeters can look better but that means the tweeters go with the car. surface mounted tweeters can look a little obtrusive but can be dislodged by an over zealous car cleaner or even extreme heat (the glue looses it's properties).

19th December 2006, 10:01	#1 (permalink)
dsinz BHPian Join Date: Aug 2006 Location: Bangalore Posts: 90	Upgradation to Component speaker setup! Team I have a Panasonic HU, Panasonic Oval rear speakers and front Sony speakers. Now I want to upgrade to Front Component speaker set up. Can I use the same sony speakers for the set up or should I use the one that comes with the component speaker set up. Also let me know what could be an ideal brand/specs for the component speaker set for ALTO. Thanks! K __________________ Drive Along! _____________________________________________ Alto Lxi Sport 2006 \| Kinetic Honda 2007

19th December 2006, 10:13	#2 (permalink)
vid6639 Distinguished - BHPian Join Date: Jul 2006 Location: Bangalore Posts: 3,788 View My Garage	dsinz the alto takes 4" speakers on the dash which you mus be aware of. Components are not available in that size. The only option you have is to put 5.25" or 6" components on the door with some modifications. Have a look at speedzak's garage. Since your setup is pretty basic go for JBL cs2165c 6" compos or for GTO507 5.25" compos. __________________ \ / ][ \|) `/ [_] "!"

19th December 2006, 10:17	#3 (permalink)
speedzak Senior - BHPian Join Date: Mar 2006 Location: Delhi. Travelling as usual! Mumbai was great. Posts: 3,907 View My Garage Infractions: 0/1 (4)	You will have to remove the Sony speakers to fit in a component system. And please do it. Theoritically, it is possible to use your current speaker as a woofer for the compos by connecting it to the crossover. But It'll kill all the benefits of buying a component. And you can't get crossover networks cheaper and They're not easily available. They come as a full system containing woofer, tweeter & crossover(s). May I ask why you want to do this? Are you so much in love with that piece of Sony? __________________ A very big THANK YOU, Bombay! Will miss you guys! :(

19th December 2006, 12:32	#4 (permalink)
dsinz BHPian Join Date: Aug 2006 Location: Bangalore Posts: 90	Well, I am not in love with Sony! . I was thinking, If I could reuse it without having to waste that speaker. Not sure if they will take back. So was bit considerate towards sony... Else I am not for sony. Did not have much knowledge of ICE when buying the car. Now thinking for some better options! __________________ Drive Along! _____________________________________________ Alto Lxi Sport 2006 \| Kinetic Honda 2007

19th December 2006, 12:56	#5 (permalink)
navin Team-BHP Support Join Date: Mar 2004 Location: mumbai Posts: 12,576	Before you install components in your Alto please discuss in detail (with your installer) where the tweeters will go (flush mounted or surface mpounted). I have seen many people who choose component speakers and do not realise that their car cannot accomodate tweeters (no tweeter pods). Besides most installers do not care and do a hatchet job. __________________ Scixelsyd Etinu

19th December 2006, 13:02	#6 (permalink)
speedzak Senior - BHPian Join Date: Mar 2006 Location: Delhi. Travelling as usual! Mumbai was great. Posts: 3,907 View My Garage Infractions: 0/1 (4)	Dsinz! Have a look here; http://www.team-bhp.com/forum/car-en...highlight=alto That will help you out I think. Dont flush mount the tweeters in Alto. My opinion. That's all. __________________ A very big THANK YOU, Bombay! Will miss you guys! :(

19th December 2006, 14:11	#8 (permalink)
dsinz BHPian Join Date: Aug 2006 Location: Bangalore Posts: 90	Oh boy! That is one hell of a ICE Setup! Amazing to see so detailing of each and every aspect. One take away for me is the placement of speakers. So let me check with some ICE dealer for the upgradation and will let you guys know. thanks mate! __________________ Drive Along! _____________________________________________ Alto Lxi Sport 2006 \| Kinetic Honda 2007

19th December 2006, 14:16	#9 (permalink)
navin Team-BHP Support Join Date: Mar 2004 Location: mumbai Posts: 12,576	flush mounted tweeters can look better but that means the tweeters go with the car. surface mounted tweeters can look a little obtrusive but can be dislodged by an over zealous car cleaner or even extreme heat (the glue looses it's properties). __________________ Scixelsyd Etinu

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Best component speaker?	nishantgandhi	Ask the Gurus	117	15th November 2008 09:31
GTO 608 Component Speaker - Part of the newly released JBL 8 Series	blueraven316	Product Discussions	56	2nd September 2008 19:50
JBL GT5-500C, is this component speaker a 4" or 5.25" ?	vishnuvijay	Ask the Gurus	23	14th June 2008 12:15
Need help for speaker setup in Ikon	girishab	Ask the Gurus	3	31st December 2007 09:57
Component speaker in Hyderabd	vivek.singh.73	Ask the Gurus	11	25th August 2005 11:42