Glossary-ice-terminology - Page 13 - Team-BHP

nura · 8th May 2007, 22:26

Sorry Navin, your explanation went over my head. Can I perhaps request a diagram or two? Also, can you suggest some modifications, which would improve matters?

low_bass_makker · 8th May 2007, 23:09

Quote:

Originally Posted by nura

Sorry Navin, your explanation went over my head. Can I perhaps request a diagram or two? Also, can you suggest some modifications, which would improve matters?

which part went above your head sir....it is plain and simple english.....havent you read some high end post by Navin Ji.......

navin · 9th May 2007, 10:33

Quote:

Originally Posted by nura

Sorry Navin, your explanation went over my head. Can I perhaps request a diagram or two? Also, can you suggest some modifications, which would improve matters?

There is not much one can do to the Santro's stock location that will look neat. What one ca do is use the stock location for a 4" coax and get 5-6" woofers in the door. Now in most cases this will require a 4 ch. amp with a crossover (like the Sony 554 which sounds a bit grainy but is cheap). Use 2 ch. for the woofers in the door and 2 for the coax in the dash. set the LPF to about 160-250Hz for the woofers in the door and the HPF to about 120-200Hz fo the coax in the dash.

nura · 9th May 2007, 20:59

I have (grandiose) plans to get 3-way comps for the front of my Santro. I guess the midrange will go into the stock dashboard location. So if it's defective, would welcome suggestions on modding it.

low_bass_makker · 10th May 2007, 00:51

Quote:

Originally Posted by nura

I have (grandiose) plans to get 3-way comps for the front of my Santro. I guess the midrange will go into the stock dashboard location. So if it's defective, would welcome suggestions on modding it.

it will be ok if you put the midrange in it...but few back will come out of the dash but I think it will not be a big problem..............

sameer_dg · 17th July 2007, 15:20

Very informative but womewhat confusing

low_bass_makker · 17th July 2007, 16:56

Quote:

Originally Posted by sameer_dg

Very informative but womewhat confusing

What is confusing you sir. We all are here to help.

navin · 18th August 2007, 10:25

ran into this link last night. most of what is discussed is pretty basic but it is well worded.
http://www.pispeakers.com/ssdm_99.pdf

low_bass_makker · 18th August 2007, 10:38

Quote:

Originally Posted by navin

ran into this link last night. most of what is discussed is pretty basic but it is well worded.
http://www.pispeakers.com/ssdm_99.pdf

quite nice Navin Ji..any link from where did you got it..

navin · 18th August 2007, 10:47

Quote:

Originally Posted by low_bass_makker

quite nice Navin Ji..any link from where did you got it..

No a friend of mine wanted me to talk to Pi Speakers into building a custom speaker (corner horn) for him. So I looked up the website for their contact details and ran into this. I knew Pi used JBL and Eminence drivers.

BTW the speaker I have envisioned for my friend will include 4 corner horns and 2 horn bass bins. The room is all concrete and 10m x 16m with a sloped ceiling (3-4.5m). It will be used purely for HT. The Audio room will use dipoles and a sophisticated MLTL.

I dont have the time to do designing anymore but I do help friends with concepts and leave the grunt work to others. My payback is that I can listen to the system whenever I visit.

DerAlte · 18th August 2007, 11:58

Quote:

Originally Posted by navin

BTW the speaker I have envisioned for my friend will include 4 corner horns and 2 horn bass bins. The room is all concrete and 10m x 16m with a sloped ceiling (3-4.5m). It will be used purely for HT. The Audio room will use dipoles and a sophisticated MLTL

Does your friend have a barn or something? Or maybe a private movie theater? An HT room of 160 sq.m. (1450 sq.ft.)

!!!

What's MLTL?

low_bass_makker · 18th August 2007, 14:39

Quote:

Originally Posted by DerAlte

What's MLTL?

Mass-Loaded Transmission Line

FT-1600 MKII

Jordan JX125 and JX150

navin · 19th August 2007, 00:03

Quote:

Originally Posted by DerAlte

Does your friend have a barn or something?

Nope he is an NRI who intends to build a house in Poona. Since it is funded by what he calls easy money (read as stock options) and his kids are all in college he is having a ball. Seperate HT room, seperate audio room, etc..

navin · 12th September 2007, 13:29

Nice demo on how woofers are made (this is the same proces for all cone loud speakers and very simialr to the process used for domes as well).

YouTube - How Subwoofers Are Made

DerAlte · 12th September 2007, 16:15

That's a nice video for knowing the construction of a speaker. Thanks, Navin-ji.

Thanks once again for the trigger - I found what Clip and I were looking for: FG-making information.

Clip-ji, have a look at this YouTube - How To Fiberglass #4 * Mold Making * Ed Norris.

There are more such videos on YouTube. Navin had already talked about the resin stuff. We only have to figure out where to get the preparatory gels and sprays. (You might need permission from your wife to use the electric beater, though

)

8th May 2007, 22:26	#181 (permalink)
nura BHPian Join Date: Feb 2007 Location: Kolkata Posts: 328	Sorry Navin, your explanation went over my head. Can I perhaps request a diagram or two? Also, can you suggest some modifications, which would improve matters? __________________ The most exciting phrase in science is not "Eureka" (I found it) but probably "That's funny...."!

9th May 2007, 20:59	#184 (permalink)
nura BHPian Join Date: Feb 2007 Location: Kolkata Posts: 328	I have (grandiose) plans to get 3-way comps for the front of my Santro. I guess the midrange will go into the stock dashboard location. So if it's defective, would welcome suggestions on modding it. __________________ The most exciting phrase in science is not "Eureka" (I found it) but probably "That's funny...."!

17th July 2007, 15:20	#186 (permalink)
sameer_dg BHPian Join Date: Nov 2005 Location: Mumbai Posts: 88	Very informative but womewhat confusing __________________ A nuclear bomb can shake my mortal frame, but nothing will stir my moral soul.

18th August 2007, 10:25	#188 (permalink)
navin Team-BHP Moderator Join Date: Mar 2004 Location: mumbai Posts: 11,851	ran into this link last night. most of what is discussed is pretty basic but it is well worded. http://www.pispeakers.com/ssdm_99.pdf __________________ Scixelsyd Etinu

12th September 2007, 13:29	#194 (permalink)
navin Team-BHP Moderator Join Date: Mar 2004 Location: mumbai Posts: 11,851	Nice demo on how woofers are made (this is the same proces for all cone loud speakers and very simialr to the process used for domes as well). YouTube - How Subwoofers Are Made __________________ Scixelsyd Etinu

12th September 2007, 16:15	#195 (permalink)
DerAlte Team-BHP Moderator Join Date: Mar 2007 Location: Bangalore Posts: 1,715	That's a nice video for knowing the construction of a speaker. Thanks, Navin-ji. Thanks once again for the trigger - I found what Clip and I were looking for: FG-making information. Clip-ji, have a look at this YouTube - How To Fiberglass #4 * Mold Making * Ed Norris. There are more such videos on YouTube. Navin had already talked about the resin stuff. We only have to figure out where to get the preparatory gels and sprays. (You might need permission from your wife to use the electric beater, though ) __________________ Never believe it cannot be done - it's only that you haven't found out how!!!

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
iS my ICE OK?	sandyrocks	Ask the Gurus	11	27th November 2007 11:58
ICE - Santro	Vino_David	Ask the Gurus	15	7th September 2007 10:09
Ice!!!	vivekiny2k	Ask the Gurus	15	14th August 2007 16:58
Need your help on ICE....Please!!!	shiv	Ask the Gurus	3	4th May 2007 20:51
Car Glossary needed on Team-Bhp	navdeep	Technical Stuff	6	8th March 2007 09:05