Santro ICE - Installation & Tuning Queries

[headers]

Thats nice to know, you are really moving on to the professional zone of installers

[navin]

Originally Posted by nura

Finolex has 196 strands, Lightning Audio 1862 strands. I believe flexibility is directly proportional to number of strands.

flexibility is proportional to the number of strands, the diameter of the strands but is primarily determined by the flexibility of the jacket and insulation.

[PatienceWins]

Originally Posted by nura

I am thinking of getting a separate amp for my sub. The 2 Ohm voice coils are connected in series to show 4 Ohm. What would the pros & cons of the following options be?
Class AB Mono amp
Class D Mono amp
Bridged 2 channel class AB amp
Bridged 2 channel class FD amp
Thanks in advance.
nura

I believe you have got a Audison 5 channel amp. So why do you require a mono? If you go for a mono with the current amplifier, I think the fifth channel in the current amp would be wasted.

I am using Eclipse XA1000 Class D Mono amp with IDQ V2.D2 sub. I am happy with the result.

[mohang_j]

I saw MX OFC speaker wires in SP road.Any body used it? have good price tag 12,14,16 gauge at 75,55,40Rs respectively.

[simply_sunny001]

Originally Posted by mohang_j

I saw MX OFC speaker wires in SP road.Any body used it? have good price tag 12,14,16 gauge at 75,55,40Rs respectively.

MX cables are Total VFM and are much better than chinese crap.

this is what i have heard.

If you are not going to big brands then MX should be your best bet

[nura]

Originally Posted by PatienceWins

I believe you have got a Audison 5 channel amp. So why do you require a mono? If you go for a mono with the current amplifier, I think the fifth channel in the current amp would be wasted.

I am using Eclipse XA1000 Class D Mono amp with IDQ V2.D2 sub. I am happy with the result.

I am using the SRx5 in 3-channel mode. It is putting out 150W x 2 (front components) + 180W x 1 (sub) @ 13.8 V. I am looking to feed about 300W to the sub.
Your Eclipse XA 1000 is putting out 320W x 1. So you have good reason to be happy
You are right. After installing the new amp, the sub channel on the old one will go to waste.

[mohang_j]

Originally Posted by simply_sunny001

MX cables are Total VFM and are much better than chinese crap.

what about Belden brand was about the same price.