Suggestions for a Good ICE Installer In TVM - Page 3 - Team-BHP

leodelg · 8th May 2008, 09:53

hi greenhorn.... i know this is little too late, but i had my ICE set up done by a certain Mr. Santhosh. He is the guy who provides the planks and boxes for Car Palace, Car Park, etc. Give him a buzz @ 9447309802 if you are still interested. He installs it at his house, which is off the bye-pass at Enjikkal. His work is very good. Hs also does home theatre systems and other audio systems under the name of Sharleo. You might have noticed this brand if you have been to Coffee Beans.

greenhorn · 8th May 2008, 10:23

Yup, i think I've seen him too. Drives around a ricer alto with stickers and fake air intakes right ? - seen him when i hang around thakaraparamb.
Actually i read one of your earlier posts that you weren't quite satisfied with him, that's why i gave him a miss.

Ok, i opened up the front speaker grille to have a second look ( it was installed at about 7 in the evening , so didn't see properly. The seal between the driver and the mounting location is not there. Some gaps, and then there are the holes in the panel to slot the indica's slot grille.

Planning to use the grille that came with the speakers , and some double adhesive foam tape to stick a ring around the base of the driver so that hopefully
1) some decoupling between the driver and the plastic door panel.
2) get a perfect seal around the driver
3) to close off the gaps in the door panel where the stock grille went.
Will post pics by the weekend

Quote:

Originally Posted by jkdas

redfire too wanted damping and I suggested Noise Kill. Maybe GreenHorn and redfire can buy in bulk and fix rattling in their Swift ,Indica . DIY

I wish

. I read the tutorials for DIY damping online. No way i can take apart a door and put it together again. Speakers maybe , but the car - no way !

bottle · 8th May 2008, 10:52

was a spacer used for the front components greenie ?

greenhorn · 8th May 2008, 10:56

nope. the screw locations were a correct match, so they screwed it direct ( the stock locations are for a 5.25" driver- and mine is

)

leodelg · 8th May 2008, 11:13

Quote:

Originally Posted by greenhorn

Yup, i think I've seen him too. Drives around a ricer alto with stickers and fake air intakes right ? - seen him when i hang around thakaraparamb.
Actually i read one of your earlier posts that you weren't quite satisfied with him, that's why i gave him a miss.

Yup.... thtz the guy....

I am pretty happy with the install.... but i screwed up the tuning! However, his suggestion to put the subwoofer on the speaker tray rather than in a box in the boot backfired.

Anyways, I'll be moving back to TVM by end of this month. I was planning to go back to him to fix the whole thing.

Jaggu · 8th May 2008, 11:38

Quote:

Originally Posted by leodelg

hi greenhorn.... i know this is little too late, but i had my ICE set up done by a certain Mr. Santhosh. He is the guy who provides the planks and boxes for Car Palace, Car Park, etc. Give him a buzz @ 9447309802 if you are still interested. He installs it at his house, which is off the bye-pass at Enjikkal. His work is very good. Hs also does home theatre systems and other audio systems under the name of Sharleo. You might have noticed this brand if you have been to Coffee Beans.

lol small world, am a very good friend of santhosh. still have my home system from sharleo tvm

ask him about a yellow zen with shavapetti aka boom box story

greenhorn · 8th May 2008, 11:46

I actually got my home system assembled by a guy called ajith. he used to have his shop- Axon i think near holy angels in general hospital jn. its not there any more though :(
I once remember seeing a TV sub at his place ( you know the type comes installed over TV's ) , and he said that they used to fit them under the seats.
I figured he wouldn't be the best guy to do a car install either . but the floorstanders he sold me were quite well made !

bottle · 8th May 2008, 23:52

Quote:

Originally Posted by greenhorn

nope. the screw locations were a correct match, so they screwed it direct ( the stock locations are for a 5.25" driver- and mine is

)

will a wooden ring help isolating the drivers from the plastic panels then ? wont cost much so worth a try

greenhorn · 9th May 2008, 05:46

But I feel that will make the whole thing look uglier

, the whole thing jutting out due to the spacer... let me see if i can get something thinner

greenhorn · 9th May 2008, 07:31

tired with a DIY isolation ring made out of double sided foam tape for one of the speakers....

......SUCESS!

the bass is distorting less, it sounds warmer, and the coloration of the mids has been cut down to some extent. Of course ,it looks like a DIY job- the white colour of the foam shows at the base of the grille, and with lots of bass, the panels still vibrate, but thats beyond my control :(

I guess it has made a much better seal ( otherwise , there were leaks all around )

will take pics when i do the other side !

jerish666 · 9th May 2008, 07:32

Quote:

Originally Posted by Jaggu

lol small world, am a very good friend of santhosh. still have my home system from sharleo tvm

ask him about a yellow zen with shavapetti aka boom box story

Haha Santhosh sharleo.He is nice.Do one thing green horn after your installation go to santhosh and tell him to re wire it.Anyway you want to do that .But he is good in doing home theater system.

greenhorn · 9th May 2008, 07:50

Thanks for the recommend jerish, but like you saw, It's been a while since i got my hands dirty with installing speakers ( the last time was while in college. Dad forbid me from doing any more DIY stuff because it was affecting my theory papers ( but Lab marks were going through the roof

)

Anyway, Its fun going back to the DIY days. I would certainly not let anyone else take this fun away from me, and certainly not pay them to!

bottle · 9th May 2008, 09:45

Quote:

Originally Posted by greenhorn

But I feel that will make the whole thing look uglier

, the whole thing jutting out due to the spacer... let me see if i can get something thinner

oh ok , not sure how indica is but palio has a speaker grill that manages to cover the spacer . anyways congrats with the diy work

jkdas · 9th May 2008, 10:06

Woke up by 5.30am and started doing DIY by 6 and got it resolved by 7.30?

greenhorn · 9th May 2008, 10:51

by the time i reach home , its too dark.So cant work on the car then. I didnt get much sleep , and I'd already covered the base of the hertz grille with foam, and it was calling to me

TY! bottle, the slots to hold the stock grille were leaking air, and the foam sealed them too !
The pics (when i post them) should explain everything hopefully

8th May 2008, 09:53	#31 (permalink)
leodelg BHPian Join Date: Apr 2007 Location: Bangalore Posts: 114	hi greenhorn.... i know this is little too late, but i had my ICE set up done by a certain Mr. Santhosh. He is the guy who provides the planks and boxes for Car Palace, Car Park, etc. Give him a buzz @ 9447309802 if you are still interested. He installs it at his house, which is off the bye-pass at Enjikkal. His work is very good. Hs also does home theatre systems and other audio systems under the name of Sharleo. You might have noticed this brand if you have been to Coffee Beans. __________________ --------------------------------- 2005 Baleno Vxi, 2003 Pulsar 150 1998 Splendor (Still in love with it)

8th May 2008, 10:52	#33 (permalink)
bottle BHPian Join Date: Sep 2006 Location: Chennai Posts: 557 View My Garage	was a spacer used for the front components greenie ? __________________ Tata Palio Sport - Station Wagon

8th May 2008, 10:56	#34 (permalink)
greenhorn BHPian Join Date: Apr 2007 Location: Trivandrum Posts: 836 View My Garage	nope. the screw locations were a correct match, so they screwed it direct ( the stock locations are for a 5.25" driver- and mine is ) __________________ 2007 Indica DLG My next Truck will be a Safari!

8th May 2008, 11:46	#37 (permalink)
greenhorn BHPian Join Date: Apr 2007 Location: Trivandrum Posts: 836 View My Garage	I actually got my home system assembled by a guy called ajith. he used to have his shop- Axon i think near holy angels in general hospital jn. its not there any more though :( I once remember seeing a TV sub at his place ( you know the type comes installed over TV's ) , and he said that they used to fit them under the seats. I figured he wouldn't be the best guy to do a car install either . but the floorstanders he sold me were quite well made ! __________________ 2007 Indica DLG My next Truck will be a Safari! Last edited by greenhorn : 8th May 2008 at 11:52.

9th May 2008, 05:46	#39 (permalink)
greenhorn BHPian Join Date: Apr 2007 Location: Trivandrum Posts: 836 View My Garage	But I feel that will make the whole thing look uglier , the whole thing jutting out due to the spacer... let me see if i can get something thinner __________________ 2007 Indica DLG My next Truck will be a Safari!

9th May 2008, 07:31	#40 (permalink)
greenhorn BHPian Join Date: Apr 2007 Location: Trivandrum Posts: 836 View My Garage	tired with a DIY isolation ring made out of double sided foam tape for one of the speakers.... ......SUCESS! the bass is distorting less, it sounds warmer, and the coloration of the mids has been cut down to some extent. Of course ,it looks like a DIY job- the white colour of the foam shows at the base of the grille, and with lots of bass, the panels still vibrate, but thats beyond my control :( I guess it has made a much better seal ( otherwise , there were leaks all around ) will take pics when i do the other side ! __________________ 2007 Indica DLG My next Truck will be a Safari! Last edited by greenhorn : 9th May 2008 at 07:34.

9th May 2008, 07:50	#42 (permalink)
greenhorn BHPian Join Date: Apr 2007 Location: Trivandrum Posts: 836 View My Garage	Thanks for the recommend jerish, but like you saw, It's been a while since i got my hands dirty with installing speakers ( the last time was while in college. Dad forbid me from doing any more DIY stuff because it was affecting my theory papers ( but Lab marks were going through the roof ) Anyway, Its fun going back to the DIY days. I would certainly not let anyone else take this fun away from me, and certainly not pay them to! __________________ 2007 Indica DLG My next Truck will be a Safari!

9th May 2008, 10:06	#44 (permalink)
jkdas Senior - BHPian Join Date: Sep 2005 Location: Thiruvananthapuram Posts: 5,226 View My Garage	Woke up by 5.30am and started doing DIY by 6 and got it resolved by 7.30? __________________ "She may not look like much, but she's got it where it counts, kid."

9th May 2008, 10:51	#45 (permalink)
greenhorn BHPian Join Date: Apr 2007 Location: Trivandrum Posts: 836 View My Garage	by the time i reach home , its too dark.So cant work on the car then. I didnt get much sleep , and I'd already covered the base of the hertz grille with foam, and it was calling to me TY! bottle, the slots to hold the stock grille were leaking air, and the foam sealed them too ! The pics (when i post them) should explain everything hopefully __________________ 2007 Indica DLG My next Truck will be a Safari! Last edited by greenhorn : 9th May 2008 at 10:57.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Pls suggest me a good ICE installer in Chennai	kpkeerthi	Ask the Gurus	88	4th July 2008 19:49
Looking for a good second hand ride - suggestions please	redsfx	Hatchbacks	39	21st December 2007 21:47
fiesta ice -- 15k and pune installer.. suggest please	ronk	Ask the Gurus	21	27th September 2007 01:20
Reliable ICE Dealer/Installer in Pune	carboy	Ask the Gurus	8	16th July 2007 15:38
Good dealer and installer for K&N in Bangalore ?	Nikhilb2008	Motorbikes	11	18th December 2006 16:12