My First Car PC Install - Research and Planning Stage - Page 6 - Team-BHP

sys_whiz · 28th March 2007, 12:27

Quote:

Originally Posted by low_bass_makker

hmm....mini meet is on the agenda....

Congrats sys....on the new setup...dont forget to post some pics of your system progress...

Thanks LBM...

Bye the way its bit off topic but wanted to know when is the next TBHP meet in HYD and which forum tells about this?

sys_whiz · 28th March 2007, 12:29

Quote:

Originally Posted by satish_appasani

Our work places are very close by and so we can take half hour or so to quickly check the setup.

not even Quater miles away

sys_whiz · 2nd April 2007, 13:46

Finally I downloaded the installation pictures to my pc... and thought to share with others :

Box of all Items :

The Dash opened for wiring.

Back Side of JVC HU. I had only 1 set of pre-out, so Y-Cable is used for RCA wiring. But this unit has a SPDIF out port. Toslink fiber cable can be used for Digital output.

Hole made in the front door to fit tweeter. I was worried whether the tweeter fitting will look good or odd.

But I was surprised that the finish looked like Factory mounted.

Front Component speakers mount. Sorry for bad picture. The Mobile camera does not work good in night.

Crossover Mounted in the back of the door pannel.

607 inside the door

937 Mount

60.4 Mount

Some after Install Pictures.

sys_whiz · 2nd April 2007, 13:52

Some more pictures

speedzak · 2nd April 2007, 19:16

Great work. Looks neat.
Congrats on getting yourself a good ICE setup.

low_bass_makker · 2nd April 2007, 19:28

very nice pics...and detailed ones...with nice macro shots of the tweeter....

What about the update on the Carputer side.....

sys_whiz · 2nd April 2007, 21:07

@speedzak : Thank You. I am happy with my setup and sounds marvelous. Thank You Gurus for helping me the right stuff and right guidance.

@LBM : Thanks LBM for the complement. Special thanks to you regarding PXA. Yeh I have a very good cam and I have some interest in photography. I bought this cam from Malyasia.

Carputer progress : I got almost 90% parts. Only 3 items are left and planning to get this from Mumbai during my visit to Mumbai next week..(Hope so...Planning to go since mid of March, but due to hectic schedule I could not)

hari_rama · 2nd April 2007, 22:03

congrats sys on the new ice....me too have same ice in my baleno too except for the amp...btw did those 6.5" woofer getinto the door speaker pods without any mods??and also did the installer put any mdf spacer rings??if no then do u experience any vibrating sounds???i mean sounds like krrr krrrr.....

hehe sorry for so much of questions

hydrashok · 2nd April 2007, 23:32

That's some good ICE, sys_whiz! Very neatly installed. Enjoyyyyyyyy!!!

sys_whiz · 3rd April 2007, 00:29

Quote:

Originally Posted by hari_rama

congrats sys on the new ice....me too have same ice in my baleno too except for the amp...btw did those 6.5" woofer getinto the door speaker pods without any mods??and also did the installer put any mdf spacer rings??if no then do u experience any vibrating sounds???i mean sounds like krrr krrrr.....

hehe sorry for so much of questions

Thank You Hari....Yes 6.5 easily fitted in the front stock. There was no Mod to the original front stock. The installer used two rings for each woofer wich came in the box to fit those. No additioal rings were used. The complete installation took lots of time to provide a neat look. As I told earlier, when the installer heard I am a TBHPian, he took extra precaution to install the system perfectly. There is no vibrating sound from the front door. It sounds great. The tunning of the amp is perfectly done that neither front nor Back dominating each other.

sys_whiz · 3rd April 2007, 00:32

Quote:

Originally Posted by hydrashok

That's some good ICE, sys_whiz! Very neatly installed. Enjoyyyyyyyy!!!

Thanks Hydra, The credit goes to Hammid of "SPROCKET"

kiranpashtakar · 24th April 2007, 13:28

Hey Sys do you drive a maroon Baleno by any chance, I have seen this move in and around hitec city layout,

sys_whiz · 24th April 2007, 13:38

Quote:

Originally Posted by kiranpashtakar

Hey Sys do you drive a maroon Baleno by any chance, I have seen this move in and around hitec city layout,

Yes Thats me. My number starts with AP28AU 1XXX

sys_whiz · 1st June 2007, 10:41

Almost after one month, I am back with all the parts needed for my Car PC setup. Waiting for the weekend (Tomorrow) to finish my install. Keep tuning for the detailed report on the Install and some pics.

rishibravo · 1st June 2007, 12:17

eagerly waiting for you install to complete maan....

2nd April 2007, 13:46	#78 (permalink)
sys_whiz BHPian Join Date: Mar 2007 Location: Boston, USA Posts: 115 View My Garage	Pictures of my JBLfyed Baleno. Finally I downloaded the installation pictures to my pc... and thought to share with others : Box of all Items : The Dash opened for wiring. Back Side of JVC HU. I had only 1 set of pre-out, so Y-Cable is used for RCA wiring. But this unit has a SPDIF out port. Toslink fiber cable can be used for Digital output. Hole made in the front door to fit tweeter. I was worried whether the tweeter fitting will look good or odd. But I was surprised that the finish looked like Factory mounted. Front Component speakers mount. Sorry for bad picture. The Mobile camera does not work good in night. Crossover Mounted in the back of the door pannel. 607 inside the door 937 Mount 60.4 Mount Some after Install Pictures.

2nd April 2007, 19:16	#80 (permalink)
speedzak Senior - BHPian Join Date: Mar 2006 Location: Cochin. ICE travelling in my Qualis! Posts: 3,374 View My Garage	Great work. Looks neat. Congrats on getting yourself a good ICE setup. __________________ I have often regretted my speech, never my silence.

2nd April 2007, 19:28	#81 (permalink)
low_bass_makker Senior - BHPian Join Date: Mar 2006 Location: Faridabad Posts: 5,748 View My Garage	very nice pics...and detailed ones...with nice macro shots of the tweeter.... What about the update on the Carputer side..... __________________ Looks Can Be Deceiving

2nd April 2007, 23:32	#84 (permalink)
hydrashok Senior - BHPian Join Date: Aug 2006 Location: In my Office Posts: 2,039 View My Garage	That's some good ICE, sys_whiz! Very neatly installed. Enjoyyyyyyyy!!! __________________ Seven are my colours Many are my lovers What was three will soon be two The music will again sound pure and true

1st June 2007, 12:17	#90 (permalink)
rishibravo BHPian Join Date: Jul 2006 Location: New Delhi Posts: 579 View My Garage	eagerly waiting for you install to complete maan.... __________________ Boyz will remain Boyz.......Only their Toyz change

2nd April 2007, 13:52	#79 (permalink)
sys_whiz BHPian Join Date: Mar 2007 Location: Boston, USA Posts: 115 View My Garage	Some more pictures

2nd April 2007, 21:07	#82 (permalink)
sys_whiz BHPian Join Date: Mar 2007 Location: Boston, USA Posts: 115 View My Garage	@speedzak : Thank You. I am happy with my setup and sounds marvelous. Thank You Gurus for helping me the right stuff and right guidance. @LBM : Thanks LBM for the complement. Special thanks to you regarding PXA. Yeh I have a very good cam and I have some interest in photography. I bought this cam from Malyasia. Carputer progress : I got almost 90% parts. Only 3 items are left and planning to get this from Mumbai during my visit to Mumbai next week..(Hope so...Planning to go since mid of March, but due to hectic schedule I could not)

2nd April 2007, 22:03	#83 (permalink)
hari_rama BHPian Join Date: Feb 2006 Location: Trichur Posts: 260 View My Garage	congrats sys on the new ice....me too have same ice in my baleno too except for the amp...btw did those 6.5" woofer getinto the door speaker pods without any mods??and also did the installer put any mdf spacer rings??if no then do u experience any vibrating sounds???i mean sounds like krrr krrrr..... hehe sorry for so much of questions

24th April 2007, 13:28	#87 (permalink)
kiranpashtakar BHPian Join Date: Aug 2005 Location: Bangalore/Hyderabad Posts: 205	Hey Sys do you drive a maroon Baleno by any chance, I have seen this move in and around hitec city layout,

1st June 2007, 10:41	#89 (permalink)
sys_whiz BHPian Join Date: Mar 2007 Location: Boston, USA Posts: 115 View My Garage	Almost after one month, I am back with all the parts needed for my Car PC setup. Waiting for the weekend (Tomorrow) to finish my install. Keep tuning for the detailed report on the Install and some pics.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Planning to Buy a New Car	Irwin	Hatchbacks	23	1st April 2008 17:36
Auto Research	Maverick1977	The Indian Car Scene!!	5	14th December 2007 07:51
Delhi ... yet again - Diesel Car ban in planning	anmolbedi	The Indian Car Scene!!	34	23rd November 2007 09:57
planning to build car sub amp, help needed	clipto333	DIY - Do it yourself	204	17th August 2007 16:25
Research led me to my long lost brothers.	chittybang	Introduce yourself	7	9th July 2007 14:24