WTB crossover network - Team-BHP

gopz · 30th May 2007, 15:17

Hi,
I am looking for a crossover which matches with Alpine 690A and Rockford Fosagte tweeters. If anyone has one to sell, PM me!

Thanks!

low_bass_makker · 30th May 2007, 15:37

you can custom make one.here are the values of the same at which you wanna cut it off...but I think the alpine and rockford would match together....

gopz · 30th May 2007, 16:56

LBM, that was very useful info, do you know anyone in Bangalore who can make this for me? And how much would it cost?

s0uljah · 30th May 2007, 17:11

You can DIY with some few basic things from SP.Road

gopz · 30th May 2007, 17:18

Quote:

Originally Posted by s0uljah

You can DIY with some few basic things from SP.Road

Well, Im prefer if someone can make it for me, because Im not too familiar with what cut off freq to use or which capacitors to buy etc...

low_bass_makker · 30th May 2007, 17:39

Quote:

Originally Posted by gopz

Well, Im prefer if someone can make it for me, because Im not too familiar with what cut off freq to use or which capacitors to buy etc...

It is a two way choose some thing in between...2-4 khz now choose the capacitor and inductor accordingly from the above post

gopz · 30th May 2007, 18:00

Quote:

Originally Posted by low_bass_makker

It is a two way choose some thing in between...2-4 khz now choose the capacitor and inductor accordingly from the above post

I still dint get you

How do I get the capacitors for 2-4k range? Does this mean I should get 2 different capacitors?

low_bass_makker · 30th May 2007, 18:08

Quote:

Originally Posted by gopz

I still dint get you

How do I get the capacitors for 2-4k range? Does this mean I should get 2 different capacitors?

it is not 2-4k range in rupess it is 2-4 Kilohertz range....i would suggest to drop the idea till you understand the thing completely or you will might damage the equipment...

Passive Crossovers

navin · 31st May 2007, 00:22

Quote:

Originally Posted by gopz

Hi,
I am looking for a crossover which matches with Alpine 690A and Rockford Fosagte tweeters. If anyone has one to sell, PM me!

the 690A has a tweeter. why do you want to do this?

low_bass_makker · 31st May 2007, 00:53

Quote:

Originally Posted by navin

the 690A has a tweeter. why do you want to do this?

Navin Ji I think he has the midbass of the alpine and the tweeter of the RF....

navin · 31st May 2007, 10:00

The 690A is a 6x9 coax from Alpine. One of the first 6x9s that I liked.

low_bass_makker · 31st May 2007, 10:39

Quote:

Originally Posted by navin

The 690A is a 6x9 coax from Alpine. One of the first 6x9s that I liked.

My bad Navin Ji......it thought it was a component......

gopz · 31st May 2007, 10:55

Quote:

Originally Posted by low_bass_makker

Navin Ji I think he has the midbass of the alpine and the tweeter of the RF....

hi Navin, LBM, I have Alpine 690A (6x9) which I am using as rear speakers. I do not have front speakers, but I have RF tweeters instead. Do you think I can remove the tweeters and install 4" speakers? will it be better? (on a Maruti 800)

low_bass_makker · 31st May 2007, 11:14

Ya sure it will help in bringing the sound stage upfront....and it will yield you better results......if budget permits try to put a component kit upfront that to of 6.5 inch size in the doors.....try finding a second hand one if tight on budget but this will improve the sound very much and it will be pleasure listing songs in the car.....

gopz · 31st May 2007, 11:48

Quote:

Originally Posted by low_bass_makker

Ya sure it will help in bringing the sound stage upfront....and it will yield you better results......if budget permits try to put a component kit upfront that to of 6.5 inch size in the doors.....try finding a second hand one if tight on budget but this will improve the sound very much and it will be pleasure listing songs in the car.....

LBM, here is what I currently have:

Alpine 9846E HU (1 pre-out only)
RF tweeters on the dash
Alpine 690A (6x9, 3way) on the rear hatch door
Polk Audio 8" sub + JBL CS 60.2 amp in the boot

The speakers and tweeters are directly connected to HU but sub is connected thru amp (LPF on)

If I go in for components, will I have to remove the current Alpine speakers, or can I still keep them?

Will the current HU be able to support the component speakers (and rear) or will I have to buy another amp?

Considering the car is a M800, is it possible to install 6.5" components on the doors?

Please advise the best thing I can do on a tight budget.

30th May 2007, 15:17	#1 (permalink)
gopz BHPian Join Date: Apr 2007 Location: Bangalore Posts: 421 View My Garage	WTB crossover network Hi, I am looking for a crossover which matches with Alpine 690A and Rockford Fosagte tweeters. If anyone has one to sell, PM me! Thanks!

30th May 2007, 15:37	#2 (permalink)
low_bass_makker Senior - BHPian Join Date: Mar 2006 Location: Faridabad Posts: 5,724 View My Garage	you can custom make one.here are the values of the same at which you wanna cut it off...but I think the alpine and rockford would match together.... __________________ Looks Can Be Deceiving

30th May 2007, 17:11	#4 (permalink)
s0uljah Senior - BHPian Join Date: Feb 2006 Location: BLR Posts: 1,794 View My Garage	You can DIY with some few basic things from SP.Road __________________ "I’m in no condition to drive…wait! I shouldn’t listen to myself, I’m drunk!" - Homer J. Simpson

31st May 2007, 10:00	#11 (permalink)
navin Team-BHP Moderator Join Date: Mar 2004 Location: mumbai Posts: 11,564	The 690A is a 6x9 coax from Alpine. One of the first 6x9s that I liked. __________________ Scixelsyd Etinu

31st May 2007, 11:14	#14 (permalink)
low_bass_makker Senior - BHPian Join Date: Mar 2006 Location: Faridabad Posts: 5,724 View My Garage	Ya sure it will help in bringing the sound stage upfront....and it will yield you better results......if budget permits try to put a component kit upfront that to of 6.5 inch size in the doors.....try finding a second hand one if tight on budget but this will improve the sound very much and it will be pleasure listing songs in the car..... __________________ Looks Can Be Deceiving

30th May 2007, 16:56	#3 (permalink)
gopz BHPian Join Date: Apr 2007 Location: Bangalore Posts: 421 View My Garage	LBM, that was very useful info, do you know anyone in Bangalore who can make this for me? And how much would it cost?

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Sharing an Internet Connection in a network	Sahil	Shifting gears	20	31st January 2008 15:36
Need Network Security Fundamentals book	jkdas	Shifting gears	0	9th January 2008 14:03
Crossover Network Queries	kumar_ranjan	Ask the Gurus	8	31st May 2007 14:04
file sharing on home network	vivekiny2k	Gadgets, Computers & Software	7	24th May 2007 10:30
Need Help with Motorcycle Service network	AntarAtma	Motorbikes	6	26th March 2007 19:50