My Predator - Ebony Black Verna CRDI SX ABS - Review at 1 year, 13500 kms - Page 8 - Team-BHP

live2drive · 1st November 2009, 12:45

Yes the doorpads and something in the dash does rattle when the engine is severely lugged. Avoid lugging by making sure that tacho needle stays above 1200RPM always (except for idling of course).

gajadonga · 2nd November 2009, 12:52

The sound is only when I am turning slowly on full radius and when am travelling at good speed and halting at the toll booths in idling of the engine I get the noise.It seems it is not a major problem but the sound is really getting on my nerves.Changing the pulley of my vehicle is a bad advice that the service adviser gave me I think.

aneeshanand · 4th November 2009, 13:05

same here too.. I know I can avoid the rattle by keeping above 1200 rpm always, but when we up shift, and if its going to take time to move, this sound really gets in to nerves...

manish.thomas · 4th November 2009, 20:21

For me,30 KMPH is the most difficult thing,here I feel I am not too fast for 3rd but I feel excess revving for 2nd. Maybe iam yet to learn to drive diesels.

Also, today as its raining cats and dogs in Chennai the whole city has come to a standstill and during my return home one moron in a Bolero hit me on my right rear door, luckily nothing much has happened, in fact I can't even notice a scratch. I think I need to wait till morning to check for any damages. A long night ahead.

4th November 2009, 13:05	#108 (permalink)
aneeshanand BHPian Join Date: Jun 2009 Location: Cochin Posts: 103 Infractions: 0/1 (4)	same here too.. I know I can avoid the rattle by keeping above 1200 rpm always, but when we up shift, and if its going to take time to move, this sound really gets in to nerves... __________________ Never drive faster than your guardian angel can fly. Verna SX CRDI ABS (Aug 2009) Santro GLS (Jun 2008) Maruti 800 (2001)

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Verna Crdi SX/ABS - Trip meter - 11k kms	amitwadhwa	Long-Term Ownership Reviews	21	10th November 2009 19:40
Hyundai Verna CRDi SX/ABS update.. 15000 kms Sep 2008	amitwadhwa	Long-Term Ownership Reviews	5	27th July 2009 16:39
My Hyundai Verna CRDI SX ABS Review	sdmn	Test-Drives & Initial Ownership Reports	11	17th March 2009 22:55
Verna CRDI (ABS) 30,000 Kms report on problems	sag_kv	Long-Term Ownership Reviews	23	28th February 2008 08:28
Verna crdi NO ABS why ??	cooldude1988765	The Indian Car Scene	23	3rd December 2006 19:51

1st November 2009, 12:45	#106 (permalink)
live2drive BHPian Join Date: Oct 2008 Location: New Delhi Posts: 402 View My Garage	Yes the doorpads and something in the dash does rattle when the engine is severely lugged. Avoid lugging by making sure that tacho needle stays above 1200RPM always (except for idling of course).

2nd November 2009, 12:52	#107 (permalink)
gajadonga BHPian Join Date: Sep 2009 Location: Hyderabad Posts: 107	The sound is only when I am turning slowly on full radius and when am travelling at good speed and halting at the toll booths in idling of the engine I get the noise.It seems it is not a major problem but the sound is really getting on my nerves.Changing the pulley of my vehicle is a bad advice that the service adviser gave me I think.

4th November 2009, 20:21	#109 (permalink)
manish.thomas Newbie Join Date: Oct 2009 Location: Chennai Posts: 19	For me,30 KMPH is the most difficult thing,here I feel I am not too fast for 3rd but I feel excess revving for 2nd. Maybe iam yet to learn to drive diesels. Also, today as its raining cats and dogs in Chennai the whole city has come to a standstill and during my return home one moron in a Bolero hit me on my right rear door, luckily nothing much has happened, in fact I can't even notice a scratch. I think I need to wait till morning to check for any damages. A long night ahead.