Viper's engine swapped B16A2 OHC - Now Turbo Charged!!

[DocG]

have you had a chance to put it on the roller yet? I'm really curious to know what she puts out now...

[nitrous]

Please lighten the car.
It will make a whole lot of difference.

[nitroxx]

Well Jiggy, I'm sure since you're tuning for the drags you would have info...thats the reason i asked. Or PM me if its not a revealing moment for you if possible. I'd really like to know your build stats. I'm impressed by how quick its being done..so would like specifics.
Or just run a 12'er on the strip and then tell me ok?

[viper]

Micky,

Since you insist I will answer some of your questions for now. Rest after the Speed Run. Answers in bold.

Originally Posted by nitroxx

Jiggy
a)what rpm does she spool at? 4000 RPM
B)whats the Vtec point set at? 4500 RPM
c)Plus redlining at?... 9500 RPM
D)what max Psi boost on stock internals? Undecided considering 12-14 PSI for drag only
E)Is the Quaife installed? NO might be done today
F)Whats the final drive ratio? Guess
G)What standalone? Race Dynamics
H)What tyre size will you be running on drag strip? 205/50/15 Slicks
I)What boost controller installed?if any? Turbo Smart

None of what I have mentioned above may remain same as we have not finished fine tuning the car yet. Will be setup today on the Dyno. Are you happy now. Don't believe in keeping secrets if you mention you are doing something then be prepared to mention it all what say. Its not what you install that makes the car go fast, its how you set it up and drive that matters.

Viper

[viper]

Hi Guys,

Thanks for all the advice on the lightening will consider it. Problem is its too much of a headache to remove and refit everything and generally in the bargain you end up damaging something(paint scratches etc), loose some clips etc. I have no place to store the removed stuff and hate driving around in a naked car

Have access to fibre glass doors, bonnet, dicky but would rather not install them. The paint job is expensive and time consuming to touch up.

Viper

[cyneverdie]

damn Viper : ]
9500 rpm redline

thats plain sick man

damn.
great stuff man , great stuff.
good luck and buckle up.

[Joz]

Originally Posted by viper

Don't believe in keeping secrets if you mention you are doing something then be prepared to mention it all what say. Its not what you install that makes the car go fast, its how you set it up and drive that matters.

Viper

Going by how caged most people are about their cars, I am really impressed by your attitude to share the details of your build. Great spirit there and all the very best.

And I agree with the rest, loose the weight: the speedrun comes only once a year.

[V-16]

9500RPM Redline??!!
My expression says it all. Will need a cosmonaut's suit to get in

[Jay]

Whoa B16A2 and now turbo... 12-14 psi boost darn thats going to be a beast... All the best Jiggy for SR...

[GTO]

c)Plus redlining at?... 9500 RPM
D)what max Psi boost on stock internals? Undecided considering 12-14 PSI for drag only

Sweet! If the balance is achieved, that car will be lightning fast at the Speed Run. Congratulations and good luck for the weekend.

[Dippy]

Fantastic figures Jiggy. 9500 rpm is insane. I hope it sets the track on fire tomorrow. Good luck for the races. We shall all be there

[manson]

Originally Posted by Dippy

I hope it sets the track on fire tomorrow. Good luck for the races. We shall all be there

Aren't the imports running only on sunday, Can someone confirm this?

manson.

[akshay1234]

Originally Posted by manson

Aren't the imports running only on sunday, Can someone confirm this?

manson.

vipers car is running on sunday.

[islero]

Crazy stuff!!!! Wishing you all the best for the speed run!!!! And, of course, waiting for dyno chart, and a nice video of ripping the car, after the speed run!

[cyneverdie]

Originally Posted by manson

Aren't the imports running only on sunday, Can someone confirm this?

manson.

Yeah man , I believe so.