Lancer getting Pimped - Project "Diablo" - Page 7 - Team-BHP

raftaar · 27th October 2007, 22:18

redeye, i own one of the earliest modded lancers in the city. a totally done DC Designs one from 7 years ago. i have one piece of advice...don't do metal modification. unless you want your car to be standing still most of the time!
i have the original lancer rally spoilers. they weigh a ton. paid 18000 to the dealer 7 yrs ago. i also have large hellas where the fogs are supposed to be. of course the entire front and rear bumpers are custom DC designs.

redeye · 28th October 2007, 11:57

@razor4077- The hella's were hard to find at the start cos i wanted them somewhere between 6inch - 7inch radius to fit in my bumpers.the pair what i have are 7inch radius .. thanks to blueraven finally found them at super carz J.c.road.
but the bad news is i think i got reaped cos i paid 5k

guys need suggestions again

this time with alloys i have ordered Lenso nx from chennai
http://www.uniracingwheel.com/wangye/LENSO-NX.jpg

they didn't have it in stock i just looked at the pic and ordered .

now i'm not sure how this will look with my lancer cause i recently saw a alloy similiar to the nx .but the spokes have too much curve to suit a lancer but will look beautiful on swifts .

pls suggest other alloy with model no that suit lancers.

akshay1234 · 28th October 2007, 12:01

redeye look at the lenso samurai series.

pawan · 28th October 2007, 12:09

Quote:

Originally Posted by redeye

this time with alloys i have ordered Lenso nx from chennai
http://www.uniracingwheel.com/wangye/LENSO-NX.jpg

they didn't have it in stock i just looked at the pic and ordered .

now i'm not sure how this will look with my lancer cause i recently saw a alloy similiar to the nx .but the spokes have too much curve to suit a lancer but will look beautiful on swifts .

pls suggest other alloy with model no that suit lancers.

i saw the similar alloy in a car accessory shop in r.t nagar but it was in gold colour do try there it would be much better than getting it from outside bangalore.

redeye · 28th October 2007, 12:59

how about lenso rs5 white for my red lancer.. will this suit

blueraven316 · 28th October 2007, 15:50

There are not many samurai series rims available in 15", though the sc03/04 look too hot, but only 17" available.
How much are you paying for a set of 5 NX in Chennai ?

raftaar · 28th October 2007, 16:10

redeye...always try to get a look at the wheels before you buy. they might not be what you bargained for if you order from pics.

oh...also i don't like wheels that have too much gap in between the spokes. they look good in cars whose brake drums are as big as the wheels. just look at sports car pics and you'll see what i mean. otherwise...all you'll see are big gaping holes.

harmon_bro · 28th October 2007, 16:56

How about these?

http://www.corsawheels.co.nz/lenso/dc5-lg2.jpg
http://www.corsawheels.co.nz/lenso/dc6-lg.jpg

rjstyles69 · 28th October 2007, 17:53

Quote:

Originally Posted by redeye

how about lenso rs5 white for my red lancer.. will this suit

rs5 is white ?

I suggest that you do some photo-shop or even better post a pic of the Lancer in the Photoshop thread and let the experts do some work.

Gives you a better idea of what suits your car best.

redeye · 28th October 2007, 22:06

Ok what do you guys think about this?

faithless_1984 · 28th October 2007, 22:34

NICE....are you getting the same body kit ?

badboyscad · 29th October 2007, 01:14

i dont think he is getting the same body kit..the lancer in the pic is actually white in color, has autopsyche bodykit and its from chennai..redeye is getting evo type kit if im correct..

redeye · 29th October 2007, 21:57

yup your right ... so lets try the same alloy with kitups lancer ... cos the bodykit is similar to it...

redeye · 30th October 2007, 19:38

pls post comments
the only main difference would be the alloys would be smaller 15-inch but i think these are 17inch

blueraven316 · 30th October 2007, 19:45

looks real nice , a lot better than the NX rim! the KR5 by lenso in white will give the same look.

28th October 2007, 16:56	#98 (permalink)
harmon_bro BHPian Join Date: Nov 2005 Location: Madras Posts: 491 View My Garage	How about these? http://www.corsawheels.co.nz/lenso/dc5-lg2.jpg http://www.corsawheels.co.nz/lenso/dc6-lg.jpg __________________ Motorheader.com

28th October 2007, 22:34	#101 (permalink)
faithless_1984 BHPian Join Date: Oct 2006 Location: Delhi Posts: 845 View My Garage	NICE....are you getting the same body kit ? __________________ *God.....is a DJ.*

29th October 2007, 01:14	#102 (permalink)
badboyscad BHPian Join Date: Feb 2007 Location: TN Posts: 588 View My Garage	i dont think he is getting the same body kit..the lancer in the pic is actually white in color, has autopsyche bodykit and its from chennai..redeye is getting evo type kit if im correct.. __________________ Im not the Best but im not like the rest

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Looking for info on good "Resorts" or "Home stays" in Madikeri	lohithrao	Route / Travel Queries	2	14th September 2007 11:28
Want To Modify My Lancer "Fast & Furious" Style"	mathayus	Modifications & Accessories	38	18th July 2007 12:15
Audi RS5 "M3 beater?" to be launched early next year "PICS"	highwayblaze	The International Automotive Scene	9	18th May 2007 01:59
"IMAGE" Autopsyche Lancer ICE Install Pics	gunbir	Sound Off and Show Off	53	20th September 2006 01:06
"VEGA" Autopsyche Lancer ICE Install Pics	gunbir	Sound Off and Show Off	18	1st May 2006 15:06

27th October 2007, 22:18	#91 (permalink)
raftaar BHPian Join Date: Oct 2007 Location: bangalore Posts: 123	redeye, i own one of the earliest modded lancers in the city. a totally done DC Designs one from 7 years ago. i have one piece of advice...don't do metal modification. unless you want your car to be standing still most of the time! i have the original lancer rally spoilers. they weigh a ton. paid 18000 to the dealer 7 yrs ago. i also have large hellas where the fogs are supposed to be. of course the entire front and rear bumpers are custom DC designs.

28th October 2007, 11:57	#92 (permalink)
redeye BHPian Join Date: Jul 2006 Location: bangalore Posts: 265 View My Garage Infractions: 0/1 (4)	@razor4077- The hella's were hard to find at the start cos i wanted them somewhere between 6inch - 7inch radius to fit in my bumpers.the pair what i have are 7inch radius .. thanks to blueraven finally found them at super carz J.c.road. but the bad news is i think i got reaped cos i paid 5k guys need suggestions again this time with alloys i have ordered Lenso nx from chennai http://www.uniracingwheel.com/wangye/LENSO-NX.jpg they didn't have it in stock i just looked at the pic and ordered . now i'm not sure how this will look with my lancer cause i recently saw a alloy similiar to the nx .but the spokes have too much curve to suit a lancer but will look beautiful on swifts . pls suggest other alloy with model no that suit lancers.

28th October 2007, 12:01	#93 (permalink)
akshay1234 Senior - BHPian Join Date: Dec 2006 Location: Mumbai Posts: 2,974 View My Garage	redeye look at the lenso samurai series.

28th October 2007, 12:59	#95 (permalink)
redeye BHPian Join Date: Jul 2006 Location: bangalore Posts: 265 View My Garage Infractions: 0/1 (4)	how about lenso rs5 white for my red lancer.. will this suit

28th October 2007, 15:50	#96 (permalink)
blueraven316 BHPian Join Date: May 2006 Location: Bangalore Posts: 887 View My Garage	There are not many samurai series rims available in 15", though the sc03/04 look too hot, but only 17" available. How much are you paying for a set of 5 NX in Chennai ?

28th October 2007, 16:10	#97 (permalink)
raftaar BHPian Join Date: Oct 2007 Location: bangalore Posts: 123	redeye...always try to get a look at the wheels before you buy. they might not be what you bargained for if you order from pics. oh...also i don't like wheels that have too much gap in between the spokes. they look good in cars whose brake drums are as big as the wheels. just look at sports car pics and you'll see what i mean. otherwise...all you'll see are big gaping holes.

28th October 2007, 22:06	#100 (permalink)
redeye BHPian Join Date: Jul 2006 Location: bangalore Posts: 265 View My Garage Infractions: 0/1 (4)	Ok what do you guys think about this?

29th October 2007, 21:57	#103 (permalink)
redeye BHPian Join Date: Jul 2006 Location: bangalore Posts: 265 View My Garage Infractions: 0/1 (4)	yup your right ... so lets try the same alloy with kitups lancer ... cos the bodykit is similar to it...

30th October 2007, 19:38	#104 (permalink)
redeye BHPian Join Date: Jul 2006 Location: bangalore Posts: 265 View My Garage Infractions: 0/1 (4)	pls post comments the only main difference would be the alloys would be smaller 15-inch but i think these are 17inch

30th October 2007, 19:45	#105 (permalink)
blueraven316 BHPian Join Date: May 2006 Location: Bangalore Posts: 887 View My Garage	looks real nice , a lot better than the NX rim! the KR5 by lenso in white will give the same look.