FFE for OHC in chennai?

[planet_rocker]

IMO the design is the main thing - SS headers/endcan will definitely last longer but will cost a bit more than MS headers/endcan.

i would suggest get in touch with Krupesh directly. keep us updated.

you can also PM BlackPearl - his car has SS headers & SS endcan (MS mid pipes) fabricated by Electra Performance, Chennai. see here: ImageShack - Hosting :: dscn0038lj3.jpg ImageShack - Hosting :: dsc03602sv0.jpg

ref: http://www.team-bhp.com/forum/641053-post27.html (Baleno 50000 Km in 3 Years 2 Months - Review (Now clocked 50,000 kms))

ref: http://www.team-bhp.com/forum/638929-post24.html (Baleno 50000 Km in 3 Years 2 Months - Review (Now clocked 50,000 kms))

[navin_bhp]

Originally Posted by jerish666

Automech do customised FFE.I deal with Automech here in Trivandrum Kerala.Normally i asked for customised FFE depends on the customers preference.Even they do tailor made sounds.

Jerish666, I spoke with Automech directly...i dont remember the name of the guy I spoke to but he did not offer any cutomized FFE. I also got the same reply from the dealer here in chennai.

[badboyscad]

guys, this is a little bit offtopic..just now spoke to chennai's automech dealer and i was quoted rs:8125 for FFE(MS headers and SS end) and a 1500 for installaion in my ALTO(0.8L)..is this price reasonable?

and harmon_bro, pls give me the exact address of electra performance in omr.

[im_srini]

Hi BadBoy, Electra's easy enough to find - just go down the OMR & you should find Electra 3 Kms beyond Tidel Park. As a reference, it's on the opposite side & just before a HCL building. Hope this helps...

[harmon_bro]

Originally Posted by badboyscad

guys, this is a little bit offtopic..just now spoke to chennai's automech dealer and i was quoted rs:8125 for FFE(MS headers and SS end) and a 1500 for installaion in my ALTO(0.8L)..is this price reasonable?

and harmon_bro, pls give me the exact address of electra performance in omr.

If im_Srini's description is not helpng then here is the postal address of the place.

ELECTRA PERFORMANCE
No: 4/952-4/952A ,
Old Mahabalipuram Road,
Nehru Nagar, Kottivakkam,
Chennai-600 096.

Tele phone No : 24540240,24543993
Fax No : 24540891
Mobile :
Kamlesh Patel - 098840 82826
Krupesh Patel - 098840 49268

[yasw_anth]

Originally Posted by badboyscad

guys, this is a little bit offtopic..just now spoke to chennai's automech dealer and i was quoted rs:8125 for FFE(MS headers and SS end) and a 1500 for installaion in my ALTO(0.8L)..is this price reasonable?

and harmon_bro, pls give me the exact address of electra performance in omr.

i got a quote of 7500+1500 for my zen mpfi .. automech FFE from motor image services jambu .

[badboyscad]

thanks harmon_bro and srini for the address.

Originally Posted by badboyscad

guys, this is a little bit offtopic..just now spoke to chennai's automech dealer and i was quoted rs:8125 for FFE(MS headers and SS end) and a 1500 for installaion in my ALTO(0.8L)..is this price reasonable?

and what about the above question?? do you feel that the price is reasonable? and how much do u think a FFE for a car like alto(0.8L) would approximately cost.?

[harmon_bro]

Originally Posted by badboyscad

thanks harmon_bro and srini for the address.



and what about the above question?? do you feel that the price is reasonable? and how much do u think a FFE for a car like alto(0.8L) would approximately cost.?

As him to waive off installation cost or give you a discount of 500 off the installation charges ) Bargain! is the magic word.

[jerish666]

Originally Posted by navin_bhp

Jerish666, I spoke with Automech directly...i dont remember the name of the guy I spoke to but he did not offer any cutomized FFE. I also got the same reply from the dealer here in chennai.

PM me your spec.

Originally Posted by badboyscad

guys, this is a little bit offtopic..just now spoke to chennai's automech dealer and i was quoted rs:8125 for FFE(MS headers and SS end) and a 1500 for installaion in my ALTO(0.8L)..is this price reasonable?

and harmon_bro, pls give me the exact address of electra performance in omr.

It is bit over priced.Normally i charge less than 800 for installation.

[navin_bhp]

Update!! I got the FFE from electra yesterday. The power produced is simply awesome.Im loving every bitof it!! The sound is mild and sweet, acceleration after 3000 rpm is completely enjoyable, The headers and the end can is chrome plated. I will post the pics today evening.

I also exchanged my 13" alloys for 15"chers. Its League I guess and the tyres are Michelin Pilot preceda. The ground clearence is noticably increased now.

I'll let the pics talk the rest...Bye for now.

[nitrous]

I've seen ur car on a friday afternoon at a sticker shop on the Pudupet main road.

[harmon_bro]

Originally Posted by navin_bhp

Update!! I got the FFE from electra yesterday. The power produced is simply awesome.Im loving every bitof it!! The sound is mild and sweet, acceleration after 3000 rpm is completely enjoyable, The headers and the end can is chrome plated. I will post the pics today evening.

I also exchanged my 13" alloys for 15"chers. Its League I guess and the tyres are Michelin Pilot preceda. The ground clearence is noticably increased now.

I'll let the pics talk the rest...Bye for now.

A video or audio of the exhaust please.

[toiingg]

Pics of the install and the price too.

[planet_rocker]

congrats Navin - where are the pics?? i am glad that you are happy with the Electra works!

PS: please upload the exhaust note wala video

[navin_bhp]

Pics coming soon guys!! I had to come to office for half a day :-(

@Nitrous - You could have talked to me na...