Modding an Alto - Page 12 - Team-BHP

amit_mechengg · 7th June 2008, 11:13

how about getting a working air scoop for cold air intake? i have seen someone do it on his corsa.

JMaruru · 7th June 2008, 12:30

Please suggest me some places in bengaluru to get performance mods done to my alto.

monty9991 · 7th June 2008, 16:54

Quote:

Originally Posted by amit_mechengg

how about getting a working air scoop for cold air intake? i have seen someone do it on his corsa.

its really not a bad idea, but it will suck water and dust directly aswell.
thats wht i dint have airscoope.

VJ_MAVRICK · 9th June 2008, 08:52

Congrats on your PiperCross Installation monty. Along with CAI do plan up FFE too in the future as you will really enjoy it revving it up. Again, is this 997CC alto you are having?

Quote:

Originally Posted by JMaruru

Please suggest me some places in bengaluru to get performance mods done to my alto.

What specifically do you have in mind about getting performance mods on your ride. Assuming it is stock car, are you planning CAI and FFE installation? Contact inhouse member Psycho or V1P3R to get any pointers on your requirements.

akshay1234 · 9th June 2008, 09:07

monty i suggest that you rectify that sharp bend. i agree the pipe wont collapse or anything but the air it receives from a straighter pipe will be more than what it receives from this.

JMaruru · 9th June 2008, 12:46

Quote:

Originally Posted by VJ_MAVRICK

What specifically do you have in mind about getting performance mods on your ride. Assuming it is stock car, are you planning CAI and FFE installation? Contact inhouse member Psycho or V1P3R to get any pointers on your requirements.

VJ, Yes it is a stock car. i am not in for hardcore mod.. just looking out for improvements in ride quality and if possible better FE in these times!

VJ_MAVRICK · 9th June 2008, 14:20

Quote:

Originally Posted by JMaruru

VJ, Yes it is a stock car. i am not in for hardcore mod.. just looking out for improvements in ride quality and if possible better FE in these times!

Go for a stage by stage modification even though you are not a modification buff. The general trend and infact i went along with a tyre and wheel upgrade and then CAI and FFE . In this way you can enjoy the ride and feel the difference and as suggested do contact them for your requirement.

Technocrat · 9th June 2008, 14:50

Quote:

Originally Posted by VJ_MAVRICK

Again, is this 997CC alto you are having?

VJ which Alto is this one

VJ_MAVRICK · 9th June 2008, 14:55

Yea Techno oh my bad ... since i drive a 1.1 i notched down the CC thinking to be around 997CC. Forgive my ignorance

and again the current alto's i think is around 800 CC (did not bother to check this specifically)

monty9991 · 9th June 2008, 15:51

Quote:

Originally Posted by VJ_MAVRICK

Congrats on your PiperCross Installation monty. Along with CAI do plan up FFE too in the future as you will really enjoy it revving it up. Again, is this 997CC alto you are having?

thanks.. No, i dont want to for FFE. because i wam waiting to grab my dad's CEDIA. actually i am getting ready for for CEDIA. as it will be too hard for my pocket when i will start modding a CEDIA. so i will move my CAI in my cedia later.
nop its 3 cyl 800 cc engine

Quote:

Originally Posted by akshay1234

monty i suggest that you rectify that sharp bend. i agree the pipe wont collapse or anything but the air it receives from a straighter pipe will be more than what it receives from this.

there is very little space in this litle car. so have to accomodate the pipe here only. but it can be done if i make a customised pipe comming from TB. but again i dont want to spend too much in modding this car, as i am waiting for dad's CEDIA to grab and install this in that, with many other performance parts.

JMaruru · 9th June 2008, 17:41

Quote:

Originally Posted by VJ_MAVRICK

Go for a stage by stage modification even though you are not a modification buff. The general trend and infact i went along with a tyre and wheel upgrade and then CAI and FFE . In this way you can enjoy the ride and feel the difference and as suggested do contact them for your requirement.

Suits me!! I shall start with tyres...and from what i have heard here.. Michelin seems to be the best. Thanx. VJ!

farhadtarapore · 10th June 2008, 11:52

Hi all,
Can anyone please tell me where in Bangalore I can get aesthetic mods done to my Alto? I already have Aura alloys and Goodyear tubeless tyres. I would like to get the following done:

Sports Steering Wheel + Gear knob
Neon Handbrakes and Pedals
Custom Made Decals
Under Body Neons
Side mirrors internally adjustable
Nice looking RPM Guage

Thank you

Drive safe.
F.

VJ_MAVRICK · 10th June 2008, 12:45

Contact our own bangy bhpian ,Blueraven (Satya) and he might be of help to you

arpandiv · 10th June 2008, 17:51

Quote:

Originally Posted by farhadtarapore

Neon Handbrakes and Pedals
Side mirrors internally adjustable

Hey,
what is Neon handbrake and pedals?
Side mirrors internally adjustable are available at M A S S. 1200 a piece.

rjstyles69 · 10th June 2008, 20:28

Finally did any of the Alto's get pimped ? If yes I would love to see pics.

7th June 2008, 11:13	#166 (permalink)
amit_mechengg BHPian Join Date: Dec 2007 Location: Pune Posts: 744 View My Garage	how about getting a working air scoop for cold air intake? i have seen someone do it on his corsa. __________________ " I dont Drive Fast , I Fly Slowly "

9th June 2008, 14:55	#174 (permalink)
VJ_MAVRICK Senior - BHPian Join Date: Jun 2007 Location: Bangalore Posts: 1,021 View My Garage	Yea Techno oh my bad ... since i drive a 1.1 i notched down the CC thinking to be around 997CC. Forgive my ignorance and again the current alto's i think is around 800 CC (did not bother to check this specifically) __________________ Every SAINT has a PAST and Every SINNER has a FUTURE

10th June 2008, 11:52	#177 (permalink)
farhadtarapore Newbie Join Date: Apr 2008 Location: Bangalore Posts: 1	Hi all, Can anyone please tell me where in Bangalore I can get aesthetic mods done to my Alto? I already have Aura alloys and Goodyear tubeless tyres. I would like to get the following done: Sports Steering Wheel + Gear knob Neon Handbrakes and Pedals Custom Made Decals Under Body Neons Side mirrors internally adjustable Nice looking RPM Guage Thank you Drive safe. F.

10th June 2008, 12:45	#178 (permalink)
VJ_MAVRICK Senior - BHPian Join Date: Jun 2007 Location: Bangalore Posts: 1,021 View My Garage	Contact our own bangy bhpian ,Blueraven (Satya) and he might be of help to you __________________ Every SAINT has a PAST and Every SINNER has a FUTURE

10th June 2008, 20:28	#180 (permalink)
rjstyles69 Senior - BHPian Join Date: Sep 2006 Location: Bengalooru.. Posts: 1,720 View My Garage	Finally did any of the Alto's get pimped ? If yes I would love to see pics. __________________ Cheers rjstyles You never really learn to SWEAR until you learn to DRIVE.

7th June 2008, 12:30	#167 (permalink)
JMaruru Newbie Join Date: Jun 2008 Location: Bangalore Posts: 6	Please suggest me some places in bengaluru to get performance mods done to my alto.

9th June 2008, 09:07	#170 (permalink)
akshay1234 Senior - BHPian Join Date: Dec 2006 Location: Mumbai Posts: 3,042 View My Garage	monty i suggest that you rectify that sharp bend. i agree the pipe wont collapse or anything but the air it receives from a straighter pipe will be more than what it receives from this.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Need Advice for Modding	anilkalvani	Technical Stuff	6	11th August 2008 05:49
modding a baleno	ankursharma	Modifications & Accessories	12	2nd June 2008 06:57
modding brakes	silver_shadow	Modifications & Accessories	2	29th May 2008 18:19
modding interiors	harry2223	Modifications & Accessories	4	14th April 2008 17:11
Modding a Caliber	herculesksp	Motorbikes	1	14th January 2007 10:32