The SAGA of Low_Bass_Makker

[low_bass_makker]

Originally Posted by tsk1979

If you can come over for SPL testing at 6am in the morning(I am sure after crying hoarse all night they would be sleeping at 6am) it would be great.

Sure sir would love to do that.

Originally Posted by clipto333

its is really nice to have a sub with good sq and spl. i agree you don't need a sub like this to win an sq competition. i was merely asking because lbm corrected me.

how much does this one costs? it is a beautiful sub.

lbm, how much power will go to this sub? 2400w?

right now Steg 2400 watts.

Originally Posted by Bass&Trouble

Hi Clip. Its a very different subwoofer. Neither your everyday SPL woofer, nor the tame SQ woofer. For it is the first and only 10kW sub to have won the EISA award (not the award for get loud and you win!). It may have won SQ competitions, but I am not aware of them. Besides, the lower level Ground Zero subs pull off very good SQ making them a good choice for someone wanting to win an SQ competition than to spend the fortune this beast costs. The mammoth power handling is of no use to a SQ competitor. What I am aware of though, is that it has been consistently reviewed by magazines alongside top SQ subs and has fared exceedingly well if not as best.

Thanks Ajay Bhai for explaining the same. The SQ of the sub is good. I will wait for few days till it is running properly after that I will post the detailed report.

[low_bass_makker]

Originally Posted by gunbir

Whoa!!!!!

I knew you were gonna get this... but damn... thats one BIG mofo....

God bless you, your ears and your car.

Congrats & Enjoy!

Thank you Phaji

Originally Posted by Gill

Congrats LBM,How much power gonna drive it,moreover how much do they cost?What are dimmension of the ENC for 40KG sub,I think it's harder to build an ENC for it rather then buying it.......(KiddinG)
Cheers!

the dimension are 36 inch width x 18 inch height and depth is 12 inch at the top and 17 at the bottom the net volume is close to 110 liters. weight will be close to 25-30 kgs and I think one cannot pick up the box alone

Originally Posted by hydrashok

Now seriously, you definitely need 1" or more MDF for this "thing". I guess you're gonna have to put in a fixed/non-removable box in the boot to house this beast, huh? Any plans of getting rid of the pesky rear seats?

That ring looks good. We can trust you to add some custom gizmo or the other to your install.

Waiting to see how the enclosure looks like, l_b_m.

Hmm the whole enclosure is made of 1" MDF and screws are used to tighten it. pics will be coming up shortly.

[low_bass_makker]

Originally Posted by esteem_lover

I think it is time LBM got the 'tank-like-build-quality' car ( waiting for the brick smiles) , what's he doing with tin sheets & damping ?

Hahahaha. I have to check for the qulaity of my next car for sure. Today itself the driver door lock is not working, which was right after I play the sub for few mins.

Originally Posted by tsk1979

Does it require its own power station, or just a 1000A alternator will do?

Hmm till now the stock electricals are working as I keep a very close watch on the voltage part and I do not play at full throttle for more than a 1 minute as they cannot supply the juice for so long.

Originally Posted by speedzak

Oh my god!
Really a BLISTERING hell! My shocks almost felt unshocked after seeing the monster. Where are you going to fit this thingy into? Don't tell me it's your Swift! No! Baba No! That poor thingy is going to have parkinsons if you do so!

I had some hope till this. Now, I'm also gonna repeat and approve it; Yeh Sardar Paagal hai!
Signed,
SpeedZak.

Yaar kya baat ho gaye....I am just trying to be loud here.

[tsk1979]

Originally Posted by low_bass_makker

Hmm till now the stock electricals are working as I keep a very close watch on the voltage part and I do not play at full throttle for more than a 1 minute as they cannot supply the juice for so long.

Why not get a higher spec alternator. A 120A one from Lucas TVS can be had for around 10K. A 150A one will go for about 12K

[low_bass_makker]

Few more pics. Compared to the Ground Zero Hydrogen 15 inch






The enclosure without port, see how calmly the sub is sitting in the Swift`s boot like a baby.

[low_bass_makker]

Originally Posted by tsk1979

Why not get a higher spec alternator. A 120A one from Lucas TVS can be had for around 10K. A 150A one will go for about 12K

Sir I agree with you 100 % but it all depends on the duty. I other words High output alter will help in playing loud but since I want short duration the stock system works fine. So why change the company fitted stuff.

[moralfibre]

Sir, any reason for placing the sub facing the hatch lid? I saw two videos on you tube where its placed facing the roof:

YouTube - Ground Zero 150+ db

YouTube - Ground Zero 150+ db part 2

Nice sub in the right hands sir. Have fun with it.

[saintsinner]

Holy *&%$%&*$%% LBM dont tell mw those hydrogens are also going into the swift!!

[Sam Kapasi]

Originally Posted by speedzak

Yeh Sardar Paagal hai!

Sir that line was patented by me. And never was there a truer example. Well done LBM!

After all, LBM is the mascot of the ICE section.

[tsk1979]

Originally Posted by low_bass_makker

Sir I agree with you 100 % but it all depends on the duty. I other words High output alter will help in playing loud but since I want short duration the stock system works fine. So why change the company fitted stuff.

Duty!? I was talking about buying from here. Something like a Optra alternator, or Safari alternator.
Anyways great setup, hope to admire it sometime without sitting in the back seat

[navin]

Originally Posted by s0uljah

Turkey VS chicken?!

more like Magpie vs Ostrich.

Originally Posted by low_bass_makker

I'd put a rubber gasket between the wood and steel ring. and lock the nuts with loctite.

[navin]

Originally Posted by hydrashok

And the poor Swift bursting at the seams
Now seriously, you definitely need 1" or more MDF for this "thing".

Hydra, when a car is bursting at the seems (not seams) it will be producing a lot of Rattle and Hum (no matter what the damping is). It wont be music.

LBM, I'd seriosuly condier a MDF/FRP/Marine Ply composite box. Atleast for the baffle. If it was me I'd have used a FRP/Carbon fiber composite.

[navin]

Originally Posted by hydrashok

The enclosure without port, see how calmly the sub is sitting in the Swift`s boot like a baby.

a ha! so when you want to open the trunk you turn the sub on and it blows the hatch open right?

[amit_sound]

Sorry for the late reply LBM bahi....my net was down..

Well congrats on getting that Monster..

You have installed the plutonium in the swift....what about the hydrogen ones? Where are you installing them?

Whats the next amp for this monster? I know we have to start guessing again

[sk456]

Goly Gawd..thats a huge mother.. im sure there some kinda law against that much bass.. ..just kidding...congrats LBM...