Siena 1.6… Oops iD'd it again - Page 2 - Team-BHP

ramie2400 · 15th January 2008, 01:54

hellspawn the setup looks real killer,very nice setup man

cheers

hellspawn · 15th January 2008, 03:30

Quote:

Originally Posted by ramie2400

hellspawn the setup looks real killer,very nice setup man

cheers

thankyou
And another update coming today...I have gone mad

hydrashok · 15th January 2008, 07:25

Quote:

Originally Posted by hellspawn

And another update coming today...I have gone mad

Already!!!! You bad boy!

Lemme guess, an ID Amp? Mmmmmm?

Flying Bong · 15th January 2008, 07:35

@hellspawn:

Good choice of equipment....how did you find the ID components to sound compared to the X-types?

hellspawn · 15th January 2008, 08:09

Quote:

Originally Posted by hydrashok

Already!!!! You bad boy!

Lemme guess, an ID Amp? Mmmmmm?

woah!!hold your horses

.... no not an amp but an upgrade to the existing new setup...
Amp will take time....Audison/Genesis are damn expensive,you know

Quote:

Originally Posted by Flying Bong

@hellspawn:

Good choice of equipment....how did you find the ID components to sound compared to the X-types?

thank you sir...well definitely better than the x-types in all the right areas.Found them quite similar to x-types in the kind of sound they produce.IMO someone who likes the x-types will definitely like the id's.The id's take it a step further compared to the x-types.
i hope you understood me..i'm still a noob in the ice dept. so trying my level best to use technical i.c.e. words to try and describe the difference.hope i didnt make a mess of it.

hellspawn · 15th January 2008, 08:38

Here are some more pics.sorry for the bad pic quality,using my phone.
this is the replica of the stock map pocket made in MDF.

The mid's:

The headunit:

navin · 15th January 2008, 09:34

Quote:

Originally Posted by hellspawn

7000Hz crossover frequency

Quote:

Originally Posted by hellspawn

oh ok..anyway is the 7000hz crossover frequency a good or a bad thing..

.

arey baba, 5.6uf at 4ohms = 7kHz. B&T was just stating the obvious.
2-Way Crossover Designer / Calculator

this means that the midbass must have a very smooth HF roll off with few break up nodes.

However the midabss might be rolled of earlier (we dont have the value of the inductor). many midbass drivers have a slight hump in their response between 2K and 6K and hence if one rolls of earlier it flattens that hump.

hydrashok · 15th January 2008, 11:08

Quote:

Originally Posted by hellspawn

Here are some more pics.sorry for the bad pic quality,using my phone.
this is the replica of the stock map pocket made in MDF.

The mid's:

Wow! That's excellent work there, on the map-pocket assy.

Flying Bong · 15th January 2008, 12:00

Quote:

thank you sir...well definitely better than the x-types in all the right areas.Found them quite similar to x-types in the kind of sound they produce.IMO someone who likes the x-types will definitely like the id's.The id's take it a step further compared to the x-types.

I think I agree...most importantly at their price, they seem to be really good VFM given that they performed quite well with significantly more expensive electronics (as experienced in Gunbir's car)

Quote:

hope i didnt make a mess of it

Not at all, am pretty poor at descriptions myself...

Enjoy your music and start planning for a Genesis P4 ultra

low_bass_makker · 15th January 2008, 12:25

Quote:

Originally Posted by hellspawn

oh ok..anyway is the 7000hz crossover frequency a good or a bad thing..

There is nothing like good or bad thing.

Quote:

Originally Posted by navin

this means that the midbass must have a very smooth HF roll off with few break up nodes.

However the midabss might be rolled of earlier (we dont have the value of the inductor). many midbass drivers have a slight hump in their response between 2K and 6K and hence if one rolls of earlier it flattens that hump.

Also Navin Ji in layman language the Midbass has to do the major mid range/vocal part as the cross over point is quite high.

hellspawn · 15th January 2008, 21:09

Quote:

Originally Posted by hydrashok

Wow! That's excellent work there, on the map-pocket assy.

well to be honest it didnt come exactly as Gunbir and I had envisioned it but yes,it looks pretty neat.Gunnu wanted it not to be a stock replica but i think the carpenter got confused...

..
but this isnt even a patch on your front doors...

hellspawn · 15th January 2008, 21:10

Quote:

Originally Posted by Flying Bong

Enjoy your music and start planning for a Genesis P4 ultra

Now that is going to be a big problem.....

navin · 15th January 2008, 21:27

Quote:

Originally Posted by low_bass_makker

Also Navin Ji in layman language the Midbass has to do the major mid range/vocal part as the cross over point is quite high.

true but there are many drivers capable of this, only given that this is a car speaker I would also be concerned about beaming. Then again the topology of the cone and the nature of it's suspension would tell us more. I have heard of many a 6 or 8" driver (Fostex, Supravox, Veravox, Hemp, Omega, Fertin, Lowther, Visaton etc..) that do not beam till 7k or even 9k.

faithless_1984 · 15th January 2008, 21:59

First the rims and tyres and now the ICE ,so finally the siena is getting some TLC after years of neglect...lol.
Amazing install manyu.!!
Specially liked the components.

hellspawn · 16th January 2008, 01:45

Quote:

Originally Posted by faithless_1984

First the rims and tyres and now the ICE ,so finally the siena is getting some TLC after years of neglect...lol.
Amazing install manyu.!!
Specially liked the components.

Ya!and now my wallet needs some TLC

.
thanks and yup the components are something else..

15th January 2008, 01:54	#16 (permalink)
ramie2400 Senior - BHPian Join Date: Nov 2006 Location: Mumbai Posts: 1,216	hellspawn the setup looks real killer,very nice setup man cheers __________________ Honda ( I V I ( 1.8 M/T V Getz Prime 1.3GLS *(ICED)* Graduated from "University of Error's"

15th January 2008, 08:38	#21 (permalink)
hellspawn Senior - BHPian Join Date: Jul 2005 Location: noida Posts: 1,494 View My Garage	Here are some more pics.sorry for the bad pic quality,using my phone. this is the replica of the stock map pocket made in MDF. The mid's: The headunit: __________________ Kenwood KDC-X8529,IPaul 4.300,Image Dynamics CTX65cs,IDQ15 If you try,and succeed at first, try not to look astonished. Last edited by hellspawn : 15th January 2008 at 08:40.

15th January 2008, 21:59	#29 (permalink)
faithless_1984 BHPian Join Date: Oct 2006 Location: Delhi Posts: 903 View My Garage	First the rims and tyres and now the ICE ,so finally the siena is getting some TLC after years of neglect...lol. Amazing install manyu.!! Specially liked the components. __________________ *God.....is a DJ.*

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Hi Guys, Please Help me Find a Match ! oops a Car	Nitinz	Sedans	17	10th August 2006 13:16
Oops Intel voice-activated remote-control fails on vice president	adya33	Shifting gears	2	1st April 2006 07:25
OOPS! Mercedes goofs up S Class demonstration.......ummmm...actually no	GTO	The International Automotive Scene	14	1st December 2005 20:58
How much for used Siena	solly	Shifting gears	3	13th June 2005 23:38
New tyres for Siena	nitinbhag	Tyre & Alloy wheel Section	5	19th April 2005 10:05

15th January 2008, 07:35	#19 (permalink)
Flying Bong BHPian Join Date: Jul 2007 Location: New Delhi Posts: 159	@hellspawn: Good choice of equipment....how did you find the ID components to sound compared to the X-types?