Alto - The In Car Entertainment Upgrade - Page 2 - Team-BHP

thelord · 4th October 2009, 00:26

Friends, any suggestions on how to sound-deaden the boot lock?

I had some free time today, so bought some desi damping material and installed it on the boot door. The results were great considering the damping material was a mixture of butyl rubber + some pad type foamy material. The only thing that vibrates now is the boot lock, makes this annoying grrrr grrr sound on some bass-heavy tracks. Any pointers will be really helpful!

DerAlte · 4th October 2009, 17:11

It can't be the boot lock. Does the hatch move when pulled by hand? Quite likely not. If it does, ask the service guys to align the latch hook so that it doesn't.

There must be something else loose inside the hatch, or the number plate rattle must be misleading inside the cabin. Check for loose cables - stay them down by stuffing some rolled closed cell foam under the sheet metal members.

S.I.N.G.H · 5th October 2009, 21:50

hey. great ICE indeed. i need some help regarding the 4" components. how much did they cost you? and can u explain the change in the sound output of your car?

regards
SINGH

thelord · 6th October 2009, 02:01

And a loose cable it was! Thanks DerAlte!

Dunno how I managed to change its position while damping. But the fix was a simple one. Have tied the cable as of now. I am amazed by the difference with this 'jugaad' damping as of now. Thinking that I should source a few sheets of NoiseKill and go for a proper round of damping. Also tightened a few loose wires for the front doors and the ride is much silent now. (damn these Maruti guys, didn't even use proper clips when installing Central Locking!

)

@S.I.N.G.H
Dhanwad veere! As I posted, the Illusion Components cost me around 5k. This included shipping and B&T included approximately 1 sq feet of damping material in it too! I went for components as I had auditioned a few co-axials and didn't like their sound at all. With components you can control the sounds-stage with proper tweeter placement. Am pretty happy with the 4"ers as of now but might go for 6.5" soon. Let me know if you need any more info, will be glad to help.

S.I.N.G.H · 6th October 2009, 09:41

thanks lord. that piece of information was really helpful. my requirement is only the components, and not the damping, and my budget is 4k. could i get any good 4" components in this budget?

nitin.dangayach · 6th October 2009, 15:46

Nice setup dude. What are the damages ?

maverick555 · 6th October 2009, 22:07

@thelord

Hope you liked the Hertz ?

abhibh · 6th October 2009, 22:35

Quote:

Originally Posted by maverick555

@thelord

Hope you liked the Hertz ?

You can bet your 7K Damping that he liked them.

P.S. Got a call from him after he auditioned your car today

amit_mechengg · 6th October 2009, 22:53

Quote:

Originally Posted by thelord

Friends, any suggestions on how to sound-deaden the boot lock?

I had some free time today, so bought some desi damping material and installed it on the boot door. The results were great considering the damping material was a mixture of butyl rubber + some pad type foamy material. The only thing that vibrates now is the boot lock, makes this annoying grrrr grrr sound on some bass-heavy tracks. Any pointers will be really helpful!

actually what vibrates is the lid that covers the cavity in the hatch that opens to the lock mechanism. the second thing that vibrates is the rear mounted tail lamp. apart from this there is a linkage in the lock that vibrates.
i have successfully nullified all vibrations in my alto.
1. remove the lid. paste a soft cloth or a thin foam or even the same material pasted on the boxes will do. paste it properly all over so that it covers both the sides.

2. take a tyre tube or some rubber piece and insert it between the tail lamp and the sheet metal. this should be tight. dont worry the tail lamp wont break.

3. after opening the lid check the lock linkages. paste some heavy rubber pieces or foam on the linkages. i have done the same on the door locks as well.

thelord · 7th October 2009, 02:48

@S.I.N.G.H
It'll be tough to find quality 4" inch components in that range. For price details, you can get in touch with Bass&Trouble who represents Illusion Audio in India.

@nitin.dangayach
Thanks bro! Damage? Well, so far close to 30k give or take.

@maverick
Sir, what a setup! You have a fine taste for acoustics.
And the tuning couldn't have been better for the genre of music you follow.

@abhibh
Wasn't expected them to be this good! For the price I'd say they are a steal!

@amit_mechengg
Thanks bro for sharing this! Out of the 3 points you listed, no. 2 was the most annoying. Used some paper folded a few times and inserted it between the tail lamp and the sheet metal. Will check out the remaining 2 soon when I go for proper damping.

ghpk · 7th October 2009, 03:36

Nice clean setup, Damping Pics are still Due.

Enjoy

bharti22shresth · 7th October 2009, 12:03

Quote:

Originally Posted by thelord

@maverick
Sir, what a setup! You have a fine taste for acoustics.
And the tuning couldn't have been better for the genre of music you follow.

@abhibh
Wasn't expected them to be this good! For the price I'd say they are a steal!

Everyone is left ROCked once they audition mav's car.

thelord · 24th October 2009, 17:37

A quick glimpse of the upgrade equipment.
Now I need a day off from office next week.

Illusion Electra 6.1 component system

Spacer rings sourced from B&T too

shreyasma · 24th October 2009, 19:26

Quote:

Originally Posted by thelord

A quick glimpse of the upgrade equipment.
Now I need a day off from office next week.

Congrats man! as you already have 4.1 you could have only purchased the mid bass driver. The crossovers and tweeters are same for 4.1 and 6.1.

This is exactly what Technocrat did to his alto. See this http://www.team-bhp.com/forum/sound-...-mid-bass.html (Illusion Electra 4.1 in Alto - Upgraded with Clarion DXZ 785 USB HU + 6.5 mid bass)

S.I.N.G.H · 25th October 2009, 00:51

thats great! congrats veer ji. now your alto is one more step ahead!! please share the sound enhancement experience with us.!

4th October 2009, 17:11	#17 (permalink)
DerAlte Team-BHP Support Join Date: Mar 2007 Location: Bangalore Posts: 2,913	It can't be the boot lock. Does the hatch move when pulled by hand? Quite likely not. If it does, ask the service guys to align the latch hook so that it doesn't. There must be something else loose inside the hatch, or the number plate rattle must be misleading inside the cabin. Check for loose cables - stay them down by stuffing some rolled closed cell foam under the sheet metal members. __________________ Never believe it cannot be done - it's only that you haven't found out how!!!

6th October 2009, 09:41	#20 (permalink)
S.I.N.G.H BHPian Join Date: Sep 2009 Location: new delhi Posts: 113 View My Garage	4" components thanks lord. that piece of information was really helpful. my requirement is only the components, and not the damping, and my budget is 4k. could i get any good 4" components in this budget?

6th October 2009, 15:46	#21 (permalink)
nitin.dangayach BHPian Join Date: Apr 2007 Location: Gurgaon Posts: 360	Nice setup dude. What are the damages ? __________________ Alto LXi 2008 \| JVC KD BT1 \| Kenwood KAC8401 \| Polk DB691 \| Polk DB401 \| Scosche E1000 Certified DIYer :)

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
IN CAR Entertainment for my SAFARI	PAVAN KADAM	Ask the Gurus	10	7th January 2008 12:07
Difficult to find In-Car Entertainment Forum or even team-bhp -> Suggestions	SoundManiac	Ask the Gurus	6	30th January 2006 13:47
Car Entertainment + Screens	indizen	Ask the Gurus	2	31st May 2005 13:23
In-car entertainment...	GreenHex	The Indian Car Scene	6	29th July 2004 02:17

4th October 2009, 00:26	#16 (permalink)
thelord BHPian Join Date: May 2009 Location: Chandigarh Posts: 58	Friends, any suggestions on how to sound-deaden the boot lock? I had some free time today, so bought some desi damping material and installed it on the boot door. The results were great considering the damping material was a mixture of butyl rubber + some pad type foamy material. The only thing that vibrates now is the boot lock, makes this annoying grrrr grrr sound on some bass-heavy tracks. Any pointers will be really helpful!

5th October 2009, 21:50	#18 (permalink)
S.I.N.G.H BHPian Join Date: Sep 2009 Location: new delhi Posts: 113 View My Garage	hey. great ICE indeed. i need some help regarding the 4" components. how much did they cost you? and can u explain the change in the sound output of your car? regards SINGH

6th October 2009, 02:01	#19 (permalink)
thelord BHPian Join Date: May 2009 Location: Chandigarh Posts: 58	And a loose cable it was! Thanks DerAlte! Dunno how I managed to change its position while damping. But the fix was a simple one. Have tied the cable as of now. I am amazed by the difference with this 'jugaad' damping as of now. Thinking that I should source a few sheets of NoiseKill and go for a proper round of damping. Also tightened a few loose wires for the front doors and the ride is much silent now. (damn these Maruti guys, didn't even use proper clips when installing Central Locking! ) @S.I.N.G.H Dhanwad veere! As I posted, the Illusion Components cost me around 5k. This included shipping and B&T included approximately 1 sq feet of damping material in it too! I went for components as I had auditioned a few co-axials and didn't like their sound at all. With components you can control the sounds-stage with proper tweeter placement. Am pretty happy with the 4"ers as of now but might go for 6.5" soon. Let me know if you need any more info, will be glad to help.

6th October 2009, 22:07	#22 (permalink)
maverick555 BHPian Join Date: Jan 2008 Location: Manchaster(UK) Posts: 61	@thelord Hope you liked the Hertz ?

7th October 2009, 02:48	#25 (permalink)
thelord BHPian Join Date: May 2009 Location: Chandigarh Posts: 58	@S.I.N.G.H It'll be tough to find quality 4" inch components in that range. For price details, you can get in touch with Bass&Trouble who represents Illusion Audio in India. @nitin.dangayach Thanks bro! Damage? Well, so far close to 30k give or take. @maverick Sir, what a setup! You have a fine taste for acoustics. And the tuning couldn't have been better for the genre of music you follow. @abhibh Wasn't expected them to be this good! For the price I'd say they are a steal! @amit_mechengg Thanks bro for sharing this! Out of the 3 points you listed, no. 2 was the most annoying. Used some paper folded a few times and inserted it between the tail lamp and the sheet metal. Will check out the remaining 2 soon when I go for proper damping.

7th October 2009, 03:36	#26 (permalink)
ghpk BHPian Join Date: Mar 2009 Location: Allahabad Posts: 300	Nice clean setup, Damping Pics are still Due. Enjoy

24th October 2009, 17:37	#28 (permalink)
thelord BHPian Join Date: May 2009 Location: Chandigarh Posts: 58	A quick glimpse of the upgrade equipment. Now I need a day off from office next week. Illusion Electra 6.1 component system Spacer rings sourced from B&T too

25th October 2009, 00:51	#30 (permalink)
S.I.N.G.H BHPian Join Date: Sep 2009 Location: new delhi Posts: 113 View My Garage	thats great! congrats veer ji. now your alto is one more step ahead!! please share the sound enhancement experience with us.!