OBD (On Board Diagnostics) On Indian Cars... - Page 12 - Team-BHP

SamtheLeo · 4th May 2009, 17:14

Guys,

Please advise if Mahindra (Scorpio 2006 SLX) would be OBD II compliant & if yes where to look for the port.

pranavt · 8th June 2009, 19:44

Can someone point out where the OBD port is in an OHC VTEC 2000 model? Bought a scanner, spent the better part of an hour searching for the damn port on both sides of the dashboard. Soiled my tshirt, cut my finger, had dust get into my contact lenses, a small bruise on my elbow but couldn't find the damn port.

Called a guy in Honda who told me that the port was near the steering wheel, nothing there. Someone in this thread said it was on the passenger side, nothing there either. Help me before i hurt myself even more

nc1bad · 8th June 2009, 20:05

sorry to break it to you dude, OHC doesnt have an OBD port. It has a 3 pin prop plug for diagnostics.

Quote:

Originally Posted by pranavt

Can someone point out where the OBD port is in an OHC VTEC 2000 model? Bought a scanner, spent the better part of an hour searching for the damn port on both sides of the dashboard. Soiled my tshirt, cut my finger, had dust get into my contact lenses, a small bruise on my elbow but couldn't find the damn port.

Called a guy in Honda who told me that the port was near the steering wheel, nothing there. Someone in this thread said it was on the passenger side, nothing there either. Help me before i hurt myself even more

pranavt · 8th June 2009, 20:22

Quote:

Originally Posted by nc1bad

sorry to break it to you dude, OHC doesnt have an OBD port. It has a 3 pin prop plug for diagnostics.

What the?

So what was this guy smoking? http://www.team-bhp.com/forum/478213-post52.html (OBD (On Board Diagnostics) On Indian Cars...)

nc1bad · 8th June 2009, 20:34

lol i think he was guessing. The port he mentioned is the same one i am referring too.
It runs on Honda proprietary protocol and diag tool. I had to return my scanner due to the same reason.

Quote:

Originally Posted by pranavt

What the?

So what was this guy smoking? http://www.team-bhp.com/forum/478213-post52.html (OBD (On Board Diagnostics) On Indian Cars...)

pranavt · 8th June 2009, 20:43

Ok, so I guess it's going to be HDS or GNA600. Both of them are prohibitively expensive, the HDS going at around 300USD and GNA600 going at around 600USD. Any suggestions from any members?

trrk · 19th June 2009, 21:12

Hi,

Quote:

Originally Posted by dilipkumar7278

So which all cars does SG work?

Works in my City CVT.

Quote:

Originally Posted by hrishig

Anybody have idea about NHC idsi? Is it there ? if yes where it is located.

In the driver's footwell, it is just behind the curve at the left corner as you face it. You can feel the connector there. With my frame, I could not manage to take a look.

http://www.team-bhp.com/forum/long-t...ml#post1354400 (My new CVT - ownership experience)

DRC · 27th July 2009, 00:15

Finally, after 2 weeks of sniffing every byte going through serial port and a lot of help at the Fiat forum, I made ELM327 work on my Fiat petra with my own software. I am able to read error codes, Fiat drawing numbes and most live parameters..

Yet I have not been able to make it work on my wife's Swift. Let you all know when I meet success!

spadival · 3rd August 2009, 09:40

If any one is interested, the communication protocol for the older model (non OBD2) Suzuki ECU's on BSII Baleno, Esteem and Gypsy, is available on this site -> Diagnostics

Using the chart and the byte sequences on the site, I managed to get responses out of my Baleno using a Windows serial port comms program, but didn't have the time to fully explore it. :(

DRC · 15th August 2009, 17:14

good find....I will try to get it working with my wife's Swift...

DRC

spadival · 15th August 2009, 19:22

Quote:

Originally Posted by DRC

good find....I will try to get it working with my wife's Swift...

DRC

Grrr.. Do you expect SWIFT to be pre OBD II ???

Thats why I specifically mentioned older model (non OBD2) Suzuki ECU's on BSII Baleno, Esteem and Gypsy.

NetfreakBombay · 15th August 2009, 19:51

Quote:

Originally Posted by spadival

If any one is interested, the communication protocol for the older model (non OBD2) Suzuki ECU's on BSII Baleno, Esteem and Gypsy, is available on this site -> Diagnostics

Using the chart and the byte sequences on the site, I managed to get responses out of my Baleno using a Windows serial port comms program, but didn't have the time to fully explore it. :(

Do you know if this might work with Alto as well?

nisarg86 · 16th August 2009, 00:26

Does Anyone know which protocol Suzuki using in Swift DDiS ?

DRC · 16th August 2009, 11:51

@Nisarg.. I am not sure but do try OBD II. It is a Fiat engine developped after 2001 so there is a possibility it might comply to OBD standards..

@Spadival.. When Maruti is over milking the success of old 1.3 esteem engine, I don't know what more to expect.

I have tried on Swift and WagonR. Both of them did not respond to OBD standard commands.

geeash · 16th August 2009, 15:20

can some one tell where is this port in fiat linea? does any one know?. i am searching it but cant find it

27th July 2009, 00:15	#173 (permalink)
DRC BHPian Join Date: Dec 2004 Location: Under the Hood Posts: 785 View My Garage	Made it work on Palio Finally, after 2 weeks of sniffing every byte going through serial port and a lot of help at the Fiat forum, I made ELM327 work on my Fiat petra with my own software. I am able to read error codes, Fiat drawing numbes and most live parameters.. Yet I have not been able to make it work on my wife's Swift. Let you all know when I meet success! __________________ _____________________ 2004 Fiat Petra 1.6, 100 16V 2008 Suzuki swift ZXi

3rd August 2009, 09:40	#174 (permalink)
spadival Senior - BHPian Join Date: Oct 2004 Location: Sydney Posts: 1,741 View My Garage	If any one is interested, the communication protocol for the older model (non OBD2) Suzuki ECU's on BSII Baleno, Esteem and Gypsy, is available on this site -> Diagnostics Using the chart and the byte sequences on the site, I managed to get responses out of my Baleno using a Windows serial port comms program, but didn't have the time to fully explore it. :( __________________ "No power on earth can stop an idea whose time has come" - Victor Hugo

15th August 2009, 17:14	#175 (permalink)
DRC BHPian Join Date: Dec 2004 Location: Under the Hood Posts: 785 View My Garage	good find....I will try to get it working with my wife's Swift... DRC __________________ _____________________ 2004 Fiat Petra 1.6, 100 16V 2008 Suzuki swift ZXi

16th August 2009, 11:51	#179 (permalink)
DRC BHPian Join Date: Dec 2004 Location: Under the Hood Posts: 785 View My Garage	@Nisarg.. I am not sure but do try OBD II. It is a Fiat engine developped after 2001 so there is a possibility it might comply to OBD standards.. @Spadival.. When Maruti is over milking the success of old 1.3 esteem engine, I don't know what more to expect. I have tried on Swift and WagonR. Both of them did not respond to OBD standard commands. __________________ _____________________ 2004 Fiat Petra 1.6, 100 16V 2008 Suzuki swift ZXi

16th August 2009, 15:20	#180 (permalink)
geeash BHPian Join Date: Apr 2009 Location: chennai Posts: 802	can some one tell where is this port in fiat linea? does any one know?. i am searching it but cant find it __________________ FIAT LINEA EMOTION PACK FLAMENCO RED PETROL DATE OF BIRTH OF THE CAR : 22-04-2009

4th May 2009, 17:14	#166 (permalink)
SamtheLeo BHPian Join Date: Apr 2009 Location: Gurgaon Posts: 91	Guys, Please advise if Mahindra (Scorpio 2006 SLX) would be OBD II compliant & if yes where to look for the port.

8th June 2009, 19:44	#167 (permalink)
pranavt BHPian Join Date: May 2008 Location: Mumbai Posts: 526 View My Garage	Can someone point out where the OBD port is in an OHC VTEC 2000 model? Bought a scanner, spent the better part of an hour searching for the damn port on both sides of the dashboard. Soiled my tshirt, cut my finger, had dust get into my contact lenses, a small bruise on my elbow but couldn't find the damn port. Called a guy in Honda who told me that the port was near the steering wheel, nothing there. Someone in this thread said it was on the passenger side, nothing there either. Help me before i hurt myself even more

8th June 2009, 20:43	#171 (permalink)
pranavt BHPian Join Date: May 2008 Location: Mumbai Posts: 526 View My Garage	Ok, so I guess it's going to be HDS or GNA600. Both of them are prohibitively expensive, the HDS going at around 300USD and GNA600 going at around 600USD. Any suggestions from any members?

16th August 2009, 00:26	#178 (permalink)
nisarg86 BHPian Join Date: Mar 2005 Location: Ahmedabad Posts: 233	Does Anyone know which protocol Suzuki using in Swift DDiS ?

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
TechSpec® : Understanding On-Board Diagnostics, also known as ECU, ECM, EMS	dadu	Technical Stuff	35	21st January 2009 03:05
PC to ECU Interface (OBD compliant cars)	turbo_c	Technical Stuff	32	2nd December 2008 15:09
Performance of Indian cars Post Monsoons on Indian Pot Holes	Tech	The Indian Car Scene	33	29th November 2008 17:03
Tactrix - OBD-II query	get_hiyyer_714	Technical Stuff	2	13th August 2007 12:09
req help with indigo sx (diesel) on board diagnostics	shldn	Technical Stuff	4	26th March 2006 20:11