Go Back   Team-BHP > Under the Hood > Technical Stuff

Thread Tools Search this Thread
Old 12th December 2007, 01:49   #1
viper316's Avatar
Join Date: Dec 2007
Location: BeNgAlUrU/PoNdY
Posts: 61
Thanked: Once
Unhappy Swift Lexus eyes Head light


I have a red swift with lexus eyes ( whats is basically known as ) the three lights with three parking lights (small ) . For the high beam i have PHILIP rallye 12v/100w bulb, but i feels its got a less spread and focus then the stock high beam light. The next thing for the low beam i have a xenon 10000k hid light , in the low beam there is a cutter which cuts the light so that its acts as a low beam and the light is not spear all around , i wanted if we can remove that cutter which places the light as low beam. So please advice on the hig beam and the low beam also
viper316 is offline   Reply With Quote

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Similar Threads
Thread Thread Starter Forum Replies Last Post
Baleno - Head light not turning off naveendhyani Technical Stuff 27 24th January 2012 22:16
Right head-light too dim amu1983 Technical Stuff 29 25th May 2009 14:44
Water droplets inside the head light assembly DRC Technical Stuff 27 11th January 2007 11:53
custom Head light of honda shriadi Shifting gears 0 19th May 2006 00:14

All times are GMT +5.5. The time now is 09:20.

Copyright 2000 - 2016, Team-BHP.com
Proudly powered by E2E Networks