G16B - Technical Specs?

[mclaren1885]

Does anyone know the following for the G16B?

1. Int Valve closing deg.
2. Gasket thickness.
3. Gasket bore dia.
4. Deck Height clearance.
5. Piston Ring depth.
6. Piston top OD.
7. Compression height.

What I do know is that the rod length is 139.6mm.

[jkdas]

Originally Posted by mclaren1885

Does anyone know the following for the G16B?

1. Int Valve closing deg.
2. Gasket thickness.
3. Gasket bore dia.
4. Deck Height clearance.
5. Piston Ring depth.
6. Piston top OD.
7. Compression height.

What I do know is that the rod length is 139.6mm.

Thought you were done with the car. Planning more mods? Is the car at Bangy? Any cosmetic mods in mind?

[mclaren1885]

Originally Posted by jkdas

Thought you were done with the car. Planning more mods? Is the car at Bangy? Any cosmetic mods in mind?

No Jk. Car is very much in Bangy. Been having some really long standing plans for the car, but not finding the time or the interest to get involved in the project as of now. Working towards it slowly. No cosmetic mods in mind.

[mclaren1885]

Originally Posted by mclaren1885

Does anyone know the following for the G16B?

1. Int Valve closing deg.
2. Gasket thickness.
3. Gasket bore dia.
4. Deck Height clearance.
5. Piston Ring depth.
6. Piston top OD.
7. Compression height.

What I do know is that the rod length is 139.6mm.

Searced some sheets in which I had scribbled some important data collected from teamswift, redlinegti, clubaleno and other places. Here is what I found.

2. 1.2mm
3. I think it is 76mm.
4. Minus 0.9mm or -2.43mm (not sure which value is true).
7. 28.55mm

Now to get cracking on some more figures like VE, rocker arm ratio etc.

Edit: Since we are grossly going OT here, can we have the posts from 299 moved into a separate thread called "G16B specific engine details" or something like that?