[jeepster]

which engine is this ?

looks like a sz2600. (gear driven)
but dosent have a turbo!

what are the bhp, torque, rpm figures of this engine?

delphi pump.

BTW its taken out of a 2005 mm truck with rear dually tyres!! (cabking??).
just look at the size of the differential.

which gear box is this?

gear ratios?

[DirtyDan]

The forerunner sz2600 did not have a turbo, this is my understanding. Not sure it was called sz2600 at that point...sz2600 is derived from an older agricultural engine.

[jeepster]

here is what i came to know about this engine.

MAHINDRA ALLWIN Nissan SD25
2,488 cc (?)
75bhp, 15-16kgm
bore and stroke of 89.0 and 100.0 mm (?)

thanks to ARKA, spike & http://en.wikipedia.org/wiki/Nissan_SD_engine.

initially i was planning to use this in my armada but no mm bellhousing is direct fit so little difficult to use in my armada.

even if i manage to add a kmt90+b warner, the final torque to axles is more than they can handle.

Kilograms meters (Kg m) x 9.804 = Newton meters (Nm)

15 kgm x 9.804 = 156.9064 Nm

engine torque x GB ratio x TC ratio x axle ratio / 4 = torque on axles/wheels

so

156 NM x 5.315 x 2.48 x 4.88 / 4 =approx 2500 NM .
16 KGM x 5.315 x 2.48 x 4.88 / 4 =approx 257 KGM .

[jeepster]

how much should i quot for the engine?
(engine+starter+alternator+clutch-plate)

[Frankenstein]

Jeepster, last night i was driving a mad CJ3B which was almost lifting its front wheels . It has the Nissan SD25 engine mentioned here with the KMT90 GB and 4.27 ratio.

I found a new engine which will beat the Isuzu G1, HURRICANE AND THE 307 hands down

OH yes it does a top speed of 130km/hr.

[jeepster]

Originally Posted by Frankenstein

Jeepster, last night i was driving a mad CJ3B which was almost lifting its front wheels . It has the Nissan SD25 engine mentioned here with the KMT90 GB and 4.27 ratio.

I found a new engine which will beat the Isuzu G1, HURRICANE AND THE 307 hands down

OH yes it does a top speed of 130km/hr.

thanks for the information.

BTW can you share the bellhousing details.

is it bolt on job or with adapter plate?

rgds,
Nikhil

[Frankenstein]

Originally Posted by jeepster

thanks for the information.

BTW can you share the bellhousing details.

is it bolt on job or with adapter plate?

rgds,
Nikhil

Nikhil the one i drove had a Nissan SD25 naturally aspirated engine. It was written NISSAN on the engine cover . You need to mate it to the KMT90 with an adapter plate.

This engine is going anywhere between 15k to 25 k. Finding one in good condition is tuff. The spares too are rare for this engine.

[jeepster]

Originally Posted by Frankenstein

This engine is going anywhere between 15k to 25 k. Finding one in good condition is tuff. The spares too are rare for this engine.

bought the full set. (the engine+starter+alternator+bellhousing+5speed GB)

engine is recently overhauled in MASS. (even crank)

http://www.youtube.com/watch?v=gsdtzv_3fpo

i am planning to use this in my armada with KMT90+ BW TC.

this mod will be done in next year.

rgds,
Nikhil

[headers]

interesting find - awaiting the outcome for us to copy

[solpie]

This engine looks like a Mahindra NEF (new engine family) non turbo , its a DI engine used extensively on the mahindra loadstar pick up. It is similar to the first engine on the scorpio.The weight was too much and it was reworked on . Parts will be available at mahindra pick up dealers .It should work well it is a good engine

[drjones]

Hi Jeepster, keep us posted, Iam planning for a SD25 myself ;-), lets see how it works out. Can you mention how much you paid for that set ? By the way is Frankenstein Mr.Sandeep.S ?
Dr.Jones

[jeepster]

Originally Posted by drjones

Hi Jeepster, keep us posted, Iam planning for a SD25 myself ;-), lets see how it works out. Can you mention how much you paid for that set ? By the way is Frankenstein Mr.Sandeep.S ?
Dr.Jones

hmm after the initial talks with Arka & raju bhai, i have decided not to use sd25 in armada.

so looks like sd25 will be used for generator for our FARM.

i have a contact in mumbai market so i am planning to buy a MDI CRDe. (mostly in 2012)


will PM you the prices.

& yes
from his FB wall it looks like Mr.Sandeep S is Frankenstein.


rgds,
Nikhil

[drjones]

Whats Arka's point against SD25? I respect his opinion a lot, quite a genius.
Dr.Jones

[jeepster]

Originally Posted by drjones

Whats Arka's point against SD25? I respect his opinion a lot, quite a genius.
Dr.Jones

weight of the engine.

please see my Facebook album.

sent you the request.

rgds,
Nikhil

[Frankenstein]

Originally Posted by jeepster

weight of the engine.

please see my Facebook album.

sent you the request.

rgds,
Nikhil

dr.jones , i have taken some snaps of the engine bay today.

Please dont listen to that heavy nonsense. Its slightly heavier to the XD3P but much lighter than the Di . Not many gurus here have practical experience with these engine s, hence the limited info.