Team-BHP - Armadillo - A Hard Top for the Mahindra Thar
Team-BHP

Team-BHP (https://www.team-bhp.com/forum/)
-   4x4 Technical (https://www.team-bhp.com/forum/4x4-technical/)
-   -   Armadillo - A Hard Top for the Mahindra Thar (https://www.team-bhp.com/forum/4x4-technical/112294-armadillo-hard-top-mahindra-thar-3.html)

Quote:

Originally Posted by manasm (Post 2643308)
We have found a new source for FRP in Bangalore and are able to get it a lot cheaper.

This allows us to bring the price down for the top to between 50,000 to 55,000.

For those of you who have ordered the top and those that already have one - expect a nice cheque in the mail in the next couple of days! We will be giving you back the difference!

Thanks all for your support!

Spotted your Thar on the Old Airport road on Thursday, at about 1700 Hrs. I drove behind and alongside from the Marathalli bridge to take a good, hard look until the time you turned right after HAL. Pictures don't really do justice to the Armadillo hard top. It looks real mean in the flesh and very well finished too. The real clincher in this design is the sloping rear, which cuts the boxiness and gives the hard top a fantastic appearance. I guess all hard top makers for the Thar need to give that sloped rear, a-la-Bolero. Also, the white Scorpio that was ahead of you looked puny. I observed that the rear wheels were wearing spacers and you were running alloys. Anyway, fantastic looking ride. :thumbs up

Cheers,

Jay

Introducing Thar Hardtops Made Up Of Mild Steel Using With Well Engineered Rigid Structure Using Angles And Tubes. They Are Welded To The Original Body Using Mig Welding Technology Ensuring Durability, No Water Leakages Or Rattling Noises. Armadillo - A Hard Top for the Mahindra Thar-tharx....jpg

Armadillo - A Hard Top for the Mahindra Thar-x7.jpg

Armadillo - A Hard Top for the Mahindra Thar-x4-2.jpg

Armadillo - A Hard Top for the Mahindra Thar-dashboard-trim.jpg

Armadillo - A Hard Top for the Mahindra Thar-tharx7.jpg

Armadillo - A Hard Top for the Mahindra Thar-tharx6.jpg

Quote:

Originally Posted by inuchadha (Post 3511201)
Introducing Thar Hardtops Made Up Of Mild Steel Using With Well Engineered Rigid Structure Using Angles And Tubes. They Are Welded To The Original Body Using Mig Welding Technology Ensuring Durability, No Water Leakages Or Rattling Noises.
========
Attachment 1276650

These tops look really nice and classy! Well done. How much do they weigh? Also any plans of fabricating one with a nice (aesthetic) roof rack?

Quote:

Originally Posted by inuchadha (Post 3511201)
Introducing Thar Hardtops Made Up Of Mild Steel Using With Well Engineered Rigid Structure Using Angles And Tubes. They Are Welded To The Original Body Using Mig Welding Technology Ensuring Durability, No Water Leakages Or Rattling Noises. Attachment 1276645

Can you please post some pictures of the interiors, especially the roof? please:

Thanks in advance!

Saw this hard top on a white jeep last week on the road. Except for the small lights all over, visually it looks pretty good. Though the same can't be said about the front and rear bumpers.

Here you go....Hope the images resolve your purpose.. feel free to contact us otherwise. cheers azad4x4.com

hi ,where did you source the pole on the front bumper , how much does it cost .

Hi do you have a short style hardtop for the thar, something like the old rally gypsy's


All times are GMT +5.5. The time now is 00:18.