Quote:
Originally Posted by wbd8779 Do NOT throw away the thermostat , If the temp gauge in your car reaches the H mark in normal city driving then something is seriously wrong , also you are complaining of low power , i drive a gypsy and mine can climb most delhi flyovers in 4th (provided momentum is maintained )
There is no need to put an auxiliarry fan for the normal commute , the stock setup does fine.
Best front seats for the gypsy which you can get in VFM terms are the Esteem ones , you should get them for about 3k from mayapuri/meerut and after reupholstering they get the job done.
I would suggest you take the car to one of the Gypsy specialists in the NCR area , who will be able to identify the issues and fix them up in a jiffy.
Attatched is the link to a friends gypsy , this has an AC installed also , even in extreme offroad situations the temprature remains under control. http://www.team-bhp.com/forum/4x4-ve...crutineer.html |
I know there is some problem with the cooling system but cant figure it out. Esteem seats are a good option. Let me scrounge meerut for this.
And that is a fab Gypsy. May be few years down the line I will be looking for something similar. Any details for the oil cooler?
Quote:
Originally Posted by KSM-Vtec Firstly CONGRATS on getting the mpfi king!!!
[*]Leave the stock fan where it is and add the aux electric fan in front of the radiator. Wagon R fan should be good. IMHO this will not solve the overheating problem completely. You will need to add a bigger copper radiator.[/list][/list]What are your plans regarding installing an AC? Am asking this question now because that will impact your overheating issue and hence you will need to plan accordingly. |
Thanks KSM. Are you sure about Wagon R fan? IIRC it pulls the air and will need to be installed towards the engine side after removing the stock fan. For AUX fan one needs a fan which throws air. AC is on cards but first need to get the car stable.
Quote:
1. Is she overheating even on an open highway without traffic?
|
NO. Not at all.
Quote:
2. Is she over heating even when you are not revving beyond 3k rpm?
|
NO.
Quote:
3. Is there any white smoke coming out exhaust?
|
GOD FORBID Hell no.
Quote:
4. Is this happening even in 2WD?
|
Nay. She only overheats in bumper to bumper traffic. The moment things start picking up she is fine.
Quote:
Originally Posted by Desmosedici Front Seats are entirely your choice. I just gave some options 
Rear Seats, please check rear view before installing, i had lots of trouble after putting the Scorpio ones. Do you really want to keep the rear seats. Its a pain for the people sitting at the back. |
Sorry if I came across a bit strong. Please keep pouring your suggestions. I need them. As for rear seats I agree Scorpio seats will kill the rear visibility. I have Qualis last row in my Jeep and its a pain to back up. But the kind of comfort it provides to rear passenger I think it is a fair trade-off. Tried and tested over a 3000Kms trip in Lahaul and Spiti valey

This vehicle will also see its fair share of touring.
Quote:
I suggested putting the Aux Fan in front of the radiator however as all others i too feel that this shouldn't be required. My MPFI never gave me troubles, i have driven in bumper to bumper traffic and also offroaded a couple of times and i never faced this issue, my vehicle was mechanically stock.
|
You are very lucky. Everyone I have contacted agree that Gypsy overheats in Delhi summers in demanding conditions (read low ratio off roading and traffic crawling.) and AUX fan is the way to go.
Quote:
Originally Posted by esteem_lover Congrats vishwas. Very nicely written buying experience. How long are you planning to keep that Govt. of India sticker on it ? Not a wise thing to retain it. How much did you buy the Gypsy for ? |
Thanks esteem_lover. Already remove the GoI from number plates. Just the one above windshield remains. I guess I will remove it after the trip at the end of this month after claiming the toll tax waiver on highway for the last time.
Quote:
Originally Posted by wbd8779 As i pointed out earlier to the Vishwas , he needs to have this checked by a competent garage who deal in Gypsies frequently. The problems could range from what you pointed out , to binding brakes , clogged radiator lines , speed of the vicious coupling fan.
As for the radiator setup , a Baleno radiator coupled with a Ritz/Indica electric fan wil take care of ANY overheating issues in the car, i speak from experience as i have done the Raid in extereme category in a 1.6 Baleno engined Gypsy using the same setup, though we faced other issues , overheating was not one of them.
Nice to see an addition to the NCR gypsy club
Cheers |
Bigger radiator is on card but for the time being I am going to try AUX fan setup. Any idea about who in Delhi can provide a good 4 core copper radiator? Also any idea of cost of Baleno radiator? I know it is a rally favorite. Does anybody know how does the viscous clutch fan works? Someone suggested that it might be malfunctioning. If yes what will be the damage to pocket? WIKI favours this theory
Fan clutch - Wikipedia, the free encyclopedia Quote:
Originally Posted by khan_sultan Should not cost more than 1k at best. Removing the t-case and cleaning it is easy.
1K for both sides -- complete set for right side & left side. People think it will be expensive and go for recambering. Bets option is take a new set, put additional leaf from current one on it and you will be ready to go. |
Well recambering is done for the time now. I will remember this for the next time. I will also get the transfer case looked into.
Quote:
Originally Posted by codelust The trouble with a Gypsy and garages is that there is no one-size-fits-all solution. The authorized service center guys will fleece you and still not get basic work done properly. Parts are often marked up by insane amounts there. Good Gypsy specialists will do 90% of the work you need, but won't touch the other 10%. Local mechs will do everything for cheap, but the quality of work will be quite questionable.
I use a mix of options. All my hardcore mechanical/engine work is done by Aman at Autoattitudes, the regular service is done at Motorcraft, Noida (with the right supervisor). Minor bits are done by a decent mech next door at Saket. |
I agree, I also use the same approach for my vehicles. I have heard good things about Aman. I think I will visit him. Any idea how cost effective he is?
Quote:
Originally Posted by IndrojitSircar The body lines seem to be quite clean. Its getting difficult to come across good gypsys priced decently. If you don't mind sharing, how much did you pick this car up for?
As for your Transfer case issue and heating issue I would suggest you take it to Motorcraft in Sahibabad. They are an authorized maruti service centre and are one of the best if not the best in Delhi NCR for gypsy's and vitaras. You could go and take the car to them on a weekend and get it checked out. They are reasonable in their charges for parts and labour. The advisor to show your car in motorcraft is Satpal Rana and you could also share your problem with Mr.Rahul Dutt, the general manager. I am sure they will pin point your problem and solve it. The place may be abit far from where ever you are based in delhi but since you are planning to take the car on a long drive, its my sincere suggestion that you get it checked in Motorcraft Sahibabad once before you go. It won't be easy to get someone to fix your car and get parts if it breaks down on the road. The issue of the transfer case and heating are critical and need immediate attention. You might damage your engine if you continue driving the car when its heating up. |
Motorcraft is next doors to me! I pass it on my way to office everyday. I have already visited them albeit to buy some spares (which they did not give). At this point I am not in favour of turning up at a big garage, pay a packet to get the car sorted and not learn anything. I would rather take it slow, get to know the vehicle and do one thing at a time. And the condition this vehicle is in, it just requires some TLC to sort it out.
As for price lets say I had a budget of 2L in mind. Now after picking this vehicle, getting sorted the brakes and suspension, getting a full service done, putting in some decent shoes, getting the touching up and rubbing done I shall be a tad below 2L. What say?
Quote:
Originally Posted by rohitbagai Do a self test to ensure that overheating has not done any damage to the engine sofar. Check the coolant to see if you find any oil mixed in it. Also while keeping the radiator cap open start the engine and rev it to 3k-4k and if you see coolant coming off like a fountain out of radiator it's a sign of damage to the head gasket. If it does not then you should be rest assured that it's not that abnormal and do jugads to keep it in the safe temp range. |
No sir the head gasket is absolutely fine I am positive about it. A car with weak gasket will boil out the coolant when pushed around. Here that is not a problem. Only traffic crawling is.
Quote:
Originally Posted by roy_libran Congratulations on getting a clean vehicle. Will we be getting to see you on our OTRs here?
By the way, I am just wondering how long that transfer case was engaged for, on Tarmac. Better get that and the shafts checked up. |
Thanks Roy. This is an Auction vehicle. I guess must have been driven quite a few times on tramac with 4WD engaged due to ignorance and neglignce.
Quote:
Originally Posted by vkarulkar Suggestions in bold. Congrats. Nice buy. what ratio of coolant and water has been used? 50/50? My fiat used to heat up like anything with 50/50. Then with 80/20 (80 water, 20 coolant) issue sorted. water is the one, which actually discipates the heat. |
I have also felt the same way. My alto 1.1 had a weak gasket which I was putting off attending to due to hectic office schedule. With water in the radiator I could putter around all day as long as I kept rpm below 2K and did not touch AC. The moment you put coolant it use to boil it out and heat up. Water is best for dissipating heat. As I read elsewhere in this forum 'Coolant is just an expensive anti rust and lubricant for your cooling system'