Team-BHP > 4x4 & Off-Roading > 4x4 Vehicles


Reply
 
Thread Tools Search this Thread
Old 29th October 2020, 22:08   #316
Distinguished - BHPian
 
Tejas@perioimpl's Avatar
 
Join Date: Sep 2008
Location: Bombay
Posts: 4,231
Thanked: 7,112 Times
Default Re: Mitsubishi Pajero SFX - Project Overland Conversion

Quote:
Originally Posted by HappyWheels View Post


Reckon the outlet going to be at the rear, so it is going to be fixed with a slope in that direction or let parking slope take care of it?

And, what is the total weight of the vehicle, as of now, with a full load of fuel and 4 of your best well fed buddies? I think you did do a weighing long time back; have you rechecked it any time recently?
There will be a slight slope with a couple of washers raising the front.


Total weight with recovery equipment, full tank and 2 pax I took last time was 2620KGS. Done just after winch was fit.

Forgot to upload two pics from the last DIY.

The table with the two stools folded. Doing a rattle test now. If it rattles, I will stick a layer of thin bubble wrap to the underside of the table:

Mitsubishi Pajero SFX - Project Overland Conversion-table.jpg

Stowed away inside. The slight lip of the L section prevents the table from sliding in the front.

Mitsubishi Pajero SFX - Project Overland Conversion-table-inside.jpg


EDIT:

Still experimenting with clamping options and designs. Has to be firm and secure.

You see a clamp for two pipes - another DIY is offing. Details soon.

Mitsubishi Pajero SFX - Project Overland Conversion-img_6593-2.jpg

Last edited by Tejas@perioimpl : 29th October 2020 at 22:14. Reason: see edit
Tejas@perioimpl is offline   (4) Thanks
Reply

Most Viewed
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Copyright 2000 - 2020, Team-BHP.com
Proudly powered by E2E Networks