MM540 DP Getting Better

nofear9009 · 6th March 2009, 14:29

Hello People
Iam posting a few pictures of the MM540 which i bought sometime back. She is 14 Years Old, At present working on the 4wd.
Work done till now 1 Head Gasket and the Boush Pump.
Later would be the body work,paint and tyres .
I would be updating the Pictures as the work progresses.
Regards
Hrishikesh

deepaktpatil · 6th March 2009, 14:42

Hi Hrishikesh,
Hope your modifications come out well. Did your jeep come with company fitted 4WD or its getting added now.

Anyway nice to see the photos and by the way check out my brothers jeep the number is MH-09-G-6363. Here is the link,
Picasa Web Albums - Deepak - Tasgaon Photos
Regards,
Deepak

nofear9009 · 6th March 2009, 14:59

Hi Deepak
Thanks, and yes iam adding the 4wd as it was 2wd before.
Your brothers jeep is good i have seen it somewhere i dont remember now, is it a 95 model too.
Regards
Hrishikesh

Ricky_3007 · 6th March 2009, 19:02

Hi Hrishikesh,

Congrats!! Nice to see your new thread . Where exactly you are restoring your jeep? and what is the plan in terms of mechs,engine, body and paint,tyres,4WD etc?

Tarkesh

harjeev · 7th March 2009, 06:04

Hi Harikesh
good to see another jeep restoration in the 4x4 section.
Many of us are doing the same thing.
Best of luck with yours.

I just like tarkesh and many others are doing the same thing!!!

gd1418 · 7th March 2009, 18:04

In pic #:5 I noticed that the U bracket of the front leaf spring out of place. Why?

nofear9009 · 8th March 2009, 00:46

the building is still under costruction you would see a lot of things that need to be put together be patient

deepaktpatil · 9th March 2009, 09:26

Quote:

Originally Posted by nofear9009

Hi Deepak
Thanks, and yes iam adding the 4wd as it was 2wd before.
Your brothers jeep is good i have seen it somewhere i dont remember now, is it a 95 model too.
Regards
Hrishikesh

Yes, its a 95 model and used to be in Kolhapur until 2000 subsequent to which its with us in Tasgaon.

nofear9009 · 18th March 2009, 19:37

Hello People
finally ! i got the single lever 4wd gearbox, today it was installed. can anyone tell me how the shifts are i mean wheres the high, low, neutral and the 2wd shift, if anyone has the diagram for it please let me know.
Hrishikesh.

furioussenna · 19th March 2009, 09:25

Dear,

The shift positions are marked on the 4WD lever itself.

Ricky_3007 · 19th March 2009, 13:24

Hi Hrishikesh,

Attached is the pic for 4WD lever shift.

Tarkesh

nofear9009 · 19th March 2009, 17:08

Quote:

Originally Posted by furioussenna

Dear,

The shift positions are marked on the 4WD lever itself.

Hi
have a closer look at the pictures ive put , i know usually the shifts are printed or marked on the levers handle , in this case that handle or what ever it may be called is not of the mm540 4wd gearbox,it belongs to some other 3 shift gearbox. i have a gypsy but the shifts are different than the mm540.
Regards
Hrishikesh

furioussenna · 19th March 2009, 20:37

Quote:

Originally Posted by nofear9009

Hi
have a closer look at the pictures ive put , i know usually the shifts are printed or marked on the levers handle , in this case that handle or what ever it may be called is not of the mm540 4wd gearbox,it belongs to some other 3 shift gearbox. i have a gypsy but the shifts are different than the mm540.
Regards
Hrishikesh

Seeing the picture attached by rickey _3007 and yours ,the knob looks same and the shift pattern also looks same.

nofear9009 · 19th March 2009, 22:47

Quote:

Originally Posted by furioussenna

Seeing the picture attached by rickey _3007 and yours ,the knob looks same and the shift pattern also looks same.

hello
iam sorry for that, anyways now the mechanic has put some red colour handle on it the shifts on that are something different, ill upload the picture of it too.
iI asked the mechanic how the shifts are and he replied you just have have to shift the lever down and the 4wd is on , then i asked him what about the high low neutral etc he said theres nothing like that , man i was worried i thought what has he done or iam done if he has done something like that lol. but later the next day i think he figured it out and told me about the shifts. But he still says there is no neutral to it. i just told myself after he completes the job ill figure it out .
Regards
Hrishikesh

nofear9009 · 2nd April 2009, 20:26

hello people
i got these lamda hub locks from banglore

6th March 2009, 14:29	#1
nofear9009 BHPian Join Date: Jan 2007 Location: Kolhapur Posts: 27 Thanked: Once	MM540 DP Getting Better Hello People Iam posting a few pictures of the MM540 which i bought sometime back. She is 14 Years Old, At present working on the 4wd. Work done till now 1 Head Gasket and the Boush Pump. Later would be the body work,paint and tyres . I would be updating the Pictures as the work progresses. Regards Hrishikesh Attached Thumbnails
	() Thanks

6th March 2009, 14:42	#2
deepaktpatil BHPian Join Date: Dec 2006 Location: KA 05, MH 10 Posts: 303 Thanked: 128 Times	Hi Hrishikesh, Hope your modifications come out well. Did your jeep come with company fitted 4WD or its getting added now. Anyway nice to see the photos and by the way check out my brothers jeep the number is MH-09-G-6363. Here is the link, Picasa Web Albums - Deepak - Tasgaon Photos Regards, Deepak
	() Thanks

6th March 2009, 14:59	#3
nofear9009 BHPian Join Date: Jan 2007 Location: Kolhapur Posts: 27 Thanked: Once	Hi Deepak Thanks, and yes iam adding the 4wd as it was 2wd before. Your brothers jeep is good i have seen it somewhere i dont remember now, is it a 95 model too. Regards Hrishikesh
	() Thanks

6th March 2009, 19:02	#4
Ricky_3007 BHPian Join Date: Jan 2009 Location: Pune Posts: 381 Thanked: 23 Times	Hi Hrishikesh, Congrats!! Nice to see your new thread . Where exactly you are restoring your jeep? and what is the plan in terms of mechs,engine, body and paint,tyres,4WD etc? Tarkesh
	() Thanks

7th March 2009, 06:04	#5
harjeev Senior - BHPian Join Date: May 2006 Location: New Delhi Posts: 1,899 Thanked: 292 Times View My Garage	Hi Harikesh good to see another jeep restoration in the 4x4 section. Many of us are doing the same thing. Best of luck with yours. I just like tarkesh and many others are doing the same thing!!!
	() Thanks

7th March 2009, 18:04	#6
gd1418 Senior - BHPian Join Date: May 2006 Location: Gurgaon Posts: 3,578 Thanked: 728 Times View My Garage	In pic #:5 I noticed that the U bracket of the front leaf spring out of place. Why?
	() Thanks

8th March 2009, 00:46	#7
nofear9009 BHPian Join Date: Jan 2007 Location: Kolhapur Posts: 27 Thanked: Once	Hello the building is still under costruction you would see a lot of things that need to be put together be patient
	() Thanks

18th March 2009, 19:37	#9
nofear9009 BHPian Join Date: Jan 2007 Location: Kolhapur Posts: 27 Thanked: Once	Hello People finally ! i got the single lever 4wd gearbox, today it was installed. can anyone tell me how the shifts are i mean wheres the high, low, neutral and the 2wd shift, if anyone has the diagram for it please let me know. Hrishikesh. Attached Thumbnails
	() Thanks

19th March 2009, 09:25	#10
furioussenna Newbie Join Date: Jan 2008 Location: Coimbatore Posts: 16 Thanked: 18 Times	Dear, The shift positions are marked on the 4WD lever itself.
	() Thanks

19th March 2009, 13:24	#11
Ricky_3007 BHPian Join Date: Jan 2009 Location: Pune Posts: 381 Thanked: 23 Times	Hi Hrishikesh, Attached is the pic for 4WD lever shift. Tarkesh Attached Thumbnails
	() Thanks

2nd April 2009, 20:26	#15
nofear9009 BHPian Join Date: Jan 2007 Location: Kolhapur Posts: 27 Thanked: Once	hello people i got these lamda hub locks from banglore Attached Thumbnails
	() Thanks