Xtreme Power does a Scorpio Powered MM550

GoSlow · 13th July 2010, 13:57

Good to see you getting your hands dirty!

I like the pics and description of the built. Good going buddy!

BTW I sent you an sms regarding the Gypsy bumper of yours?

Cheers
Ankit

nikibusa · 13th July 2010, 22:19

Damn Allan. I just remembered my good old days of training at Mahindra's, working on Jeeps and doing things exactly they way you are. Best of Luck for your project

SPIKE ARRESTOR · 20th July 2010, 19:54

Quote:

Originally Posted by xtreme power

the two diff housings
550 and 2wd 540 with the axles
----------
the new orientation

Allan for the assembly what preload values have you used? Can we have some pics showing the working clearances?

Spike

DHABHAR.BEHRAM · 20th July 2010, 22:08

Dear Allan - I presume you shall build clearance between the axle housing and the engine by adapting the SPOA layout, which seems logical to do as yours is a one vehicle project and not production intent. Please be careful of propeller shaft angles but then I don't have to tell you that, you already would know. I look forward to seeing the completed vehicle soon. Performance is expected to be very good. Best of luck.

Best regards,

Behram Dhabhar

kavesh55 · 22nd July 2010, 13:43

There is no like this thread option like facebook so cannot do that.
Some really good thread to look forward too. Not a 4x4 person but like the machine shaping up. The core benefit of this setup I believe is gonna be perormance in capital. Good work Allan.

AVR · 23rd July 2010, 10:22

Hey Allan,

Updates please. Am really looking forward to seeing the finished vehicle. When are you updating this thread?

Cheers,
Adi

vomhorizon · 10th August 2010, 01:16

hi , i would like to see the pics as well , i am dying to do this mod and am currently looking for a jeep...

wanderhermit · 17th August 2010, 16:49

Allan, i am keenly following the progress of this monster. Pl provide updates.

xtreme power · 14th December 2010, 19:20

Shes finally back in bombay:
next upgrade is custom cabin an air condition

sreejeshmp · 14th December 2010, 19:27

congratulations

You did it

and did it before M&M !!

xtreme power · 14th December 2010, 19:28

A few action pics, from tpc this year
i was pleasantly suprised with her performance

EDIT: Special thanks to arka and jyobeb for guiding me through this entire project.
ohh forgot, diff locks also are pending, arka im gonna trouble you again

gsferrari · 14th December 2010, 19:55

Folks - up there is what the Thar SHOULD have been.

Allan, lets put it into production. It really performed admirably at TPC (well until it became a weed whacker at my SS

)

he he...sorry!!!

SPIKE ARRESTOR · 14th December 2010, 21:01

@GS, yeah this is a JEEP, but sorry to say it will never see light of day in a production setup. Hope you understand what I mean.

Spike

xtreme power · 15th December 2010, 00:09

Quote:

Originally Posted by gsferrari

Folks - up there is what the Thar SHOULD have been.

Allan, lets put it into production. It really performed admirably at TPC (well until it became a weed whacker at my SS

)

he he...sorry!!!

done buddy,
come and test drive her tomorrow,
shes got seats straight off a pajero so now you cant complain

14000rpm · 15th December 2010, 07:18

allan, what is the engine on this project of yours? pic from TPMC 2010

13th July 2010, 13:57	#46
GoSlow BHPian Join Date: Nov 2008 Location: Noida Posts: 507 Thanked: 78 Times	Good to see you getting your hands dirty! I like the pics and description of the built. Good going buddy! BTW I sent you an sms regarding the Gypsy bumper of yours? Cheers Ankit
	() Thanks

13th July 2010, 22:19	#47
nikibusa BHPian Join Date: Apr 2004 Location: Vikhroli - (Mumbai) Posts: 716 Thanked: 29 Times View My Garage	Damn Allan. I just remembered my good old days of training at Mahindra's, working on Jeeps and doing things exactly they way you are. Best of Luck for your project
	() Thanks

20th July 2010, 22:08	#49
DHABHAR.BEHRAM Distinguished - BHPian Join Date: Jul 2007 Location: MUMBAI Posts: 3,060 Thanked: 5,353 Times	Dear Allan - I presume you shall build clearance between the axle housing and the engine by adapting the SPOA layout, which seems logical to do as yours is a one vehicle project and not production intent. Please be careful of propeller shaft angles but then I don't have to tell you that, you already would know. I look forward to seeing the completed vehicle soon. Performance is expected to be very good. Best of luck. Best regards, Behram Dhabhar
	() Thanks

22nd July 2010, 13:43	#50
kavesh55 BHPian Join Date: Nov 2007 Location: Mumbai Posts: 748 Thanked: 49 Times	There is no like this thread option like facebook so cannot do that. Some really good thread to look forward too. Not a 4x4 person but like the machine shaping up. The core benefit of this setup I believe is gonna be perormance in capital. Good work Allan.
	() Thanks

23rd July 2010, 10:22	#51
AVR BHPian Join Date: Apr 2008 Location: Ahmedabad Posts: 978 Thanked: 847 Times View My Garage	Hey Allan, Updates please. Am really looking forward to seeing the finished vehicle. When are you updating this thread? Cheers, Adi
	() Thanks

10th August 2010, 01:16	#52
vomhorizon Newbie Join Date: Jul 2010 Location: Patiala Posts: 3 Thanked: 0 Times	hi , i would like to see the pics as well , i am dying to do this mod and am currently looking for a jeep...
	() Thanks

17th August 2010, 16:49	#53
wanderhermit BHPian Join Date: Jun 2009 Location: Panchkula Posts: 198 Thanked: 151 Times	Allan, i am keenly following the progress of this monster. Pl provide updates.
	() Thanks

14th December 2010, 19:20	#54
xtreme power BHPian Join Date: Jul 2005 Location: mumbai Posts: 732 Thanked: 75 Times View My Garage	Re: Xtreme Power does a Scorpio Powered MM550 Shes finally back in bombay: next upgrade is custom cabin an air condition Attached Thumbnails
	() Thanks

14th December 2010, 19:27	#55
sreejeshmp BHPian Join Date: May 2007 Location: Areekode Posts: 651 Thanked: 821 Times	Re: Xtreme Power does a Scorpio Powered MM550 congratulations You did it and did it before M&M !!
	() Thanks

14th December 2010, 19:28	#56
xtreme power BHPian Join Date: Jul 2005 Location: mumbai Posts: 732 Thanked: 75 Times View My Garage	Re: Xtreme Power does a Scorpio Powered MM550 A few action pics, from tpc this year i was pleasantly suprised with her performance EDIT: Special thanks to arka and jyobeb for guiding me through this entire project. ohh forgot, diff locks also are pending, arka im gonna trouble you again Attached Thumbnails Last edited by xtreme power : 14th December 2010 at 19:32.
	() Thanks

14th December 2010, 19:55	#57
gsferrari Senior - BHPian Join Date: May 2009 Location: Chennai Posts: 1,014 Thanked: 1,806 Times	Re: Xtreme Power does a Scorpio Powered MM550 Folks - up there is what the Thar SHOULD have been. Allan, lets put it into production. It really performed admirably at TPC (well until it became a weed whacker at my SS ) he he...sorry!!!
	() Thanks

14th December 2010, 21:01	#58
SPIKE ARRESTOR Senior - BHPian Join Date: Nov 2009 Location: Germany Posts: 2,854 Thanked: 1,532 Times	Re: Xtreme Power does a Scorpio Powered MM550 @GS, yeah this is a JEEP, but sorry to say it will never see light of day in a production setup. Hope you understand what I mean. Spike
	() Thanks

15th December 2010, 07:18	#60
14000rpm Senior - BHPian Join Date: Dec 2007 Location: Helsinki Posts: 2,340 Thanked: 5,556 Times View My Garage	Re: Xtreme Power does a Scorpio Powered MM550 allan, what is the engine on this project of yours? pic from TPMC 2010 Attached Thumbnails
	() Thanks